Hi guys, I picked up a 2011 Outlander 800. Little high on miles, and in need of some repairs. I like try to save money, and sometimes it bites me. So, at this point I have completed most of the repairs, and am loving this machine. But starting to think I should have just spent the extra cash and got a new one.
Outlander 570 clutch weights
Wondering if anyone has a set of stock clutch weights that will fit a 16 outty 570. #660 one somehow let go and I can only buy full sets new. Hopefully someone has a set laying around I could purchase. Thanks !
2017 xmr 650
Anyone know the rear axle nut socket size
wpsharpshooter – Winner of May 2018 ATV of the Month!
Congrats to wpsharpshooter for winning this month!
wpsharpshooter
2017 850sp Titanium Metallic
Decepticon Edition
14in STI HD3 Wheels
28in Mud Lite II
24in Bazooka Party Bar
Hays Fabrication LED Headlights
ATV Guru Front w/LED
Polaris 3500 lb winch
Polaris rear bumper w/ LED
Polaris Hand-guards
Polaris Lock-N-Ride rear cargo box
Polaris Fender Flares
wpsharpshooter
2017 850sp Titanium Metallic
Decepticon Edition
14in STI HD3 Wheels
28in Mud Lite II
24in Bazooka Party Bar
Hays Fabrication LED Headlights
ATV Guru Front w/LED
Polaris 3500 lb winch
Polaris rear bumper w/ LED
Polaris Hand-guards
Polaris Lock-N-Ride rear cargo box
Polaris Fender Flares
Submit your ATV – June 2018 – Polaris ATV of the Month Contest!
Get Ready! The June 2018 Polaris ATV of the month contest is starting RIGHT NOW! This month we are looking for the best photo that features your Polaris ATV. So get out there, get creative, enjoy some safe riding and take some photos! We welcome everyone including vendors to participate. The winner of the contest is decided by you the community, so stick around for the voting process.
Voting will begin around June 15th, 2018 and run to the end of the month. Once the voting ends we will publish the winning photos on the front page and the winners will also receive:
- The photo must be posted in this thread.
- Only one picture will be allowed, so make it your best!
- You must be the owner of the Polaris ATV.
- Please include a description of your ATV with a list of all modifications and enhancements.
- You can only win once every 12 months
- PolarisATVForums Stickers
- Premium Membership
- $25 Gift Card
- Your bike will be featured on the home page of the site
Swap Clutch Covers from Newer Years To 87 Trail Boss?
Hi,
I'm looking for an equivalency list of parts for my 1987 Polaris 250 Trail Boss W877527
If you could also share how you generated that list, it would be much appreciated since I've found a few of those lists on here using the search function but can't make my own.
I'm basically looking to swap out my inner and outer clutch covers and haven't found the part numbers listed on Bike-Bandit for sale (either discontinued or just aren't available due to no sellers).
What model years could I just swap the inner/outer clutch covers from? Also, what about the inner clutch seal (5410411)? Has anyone had luck with this sort of thing?
Thank you very much in advance!
I'm looking for an equivalency list of parts for my 1987 Polaris 250 Trail Boss W877527
If you could also share how you generated that list, it would be much appreciated since I've found a few of those lists on here using the search function but can't make my own.
I'm basically looking to swap out my inner and outer clutch covers and haven't found the part numbers listed on Bike-Bandit for sale (either discontinued or just aren't available due to no sellers).
What model years could I just swap the inner/outer clutch covers from? Also, what about the inner clutch seal (5410411)? Has anyone had luck with this sort of thing?
Thank you very much in advance!
Xmr 570
My son just reacently turned is 2017 570 over in about 3 feet of water and water entered the motor along with some sand. I flushed the motor and cleaned the air box out and also the throttle body. It will turn over but wont start. I also put new plugs in it, checked all the fuses and made sure i was getting fuel to the injectors. It also has good spark but will not start any help would be much appreciated.. Also what is the compression on the cyls on this bike thanks.
New guy from WNY
Hello, new member here. In 1995, my Dad bought new a 1995 Polaris Magnum 2x4 to replace a stolen Yamaha Warrior.
He rode this ATV for many years accumulating about 1,400 miles. In 2006, he won a 2006 Sportsman 450. The Magnum has sat ever since. Outside.
About a month ago, the whole ATV has come apart and a thorough going through has commenced. Carb was seized, stator was junk, brake hoses were cracked, master cylinder/handle frozen, rust on the ATV, rusted fender screws.
A little over a month in and the thing runs, and sweet. Fresh oil change, fresh ATF+4 in the trans, new chain and sprockets, all new brake pads and caliper rebuilds, new -3AN braided hoses for brake lines with appropriate fittings, new brake handle and master cylinder, new grips, new (used rebuild) Mikuni carb, new Kenda BearClaws, new stainless bolts/nuts for the fenders, new stator, plug and a bunch of other misc odds and ends.
Will be at Tall Pines ATV park June 9th. If you are there and see some big fella riding a green 95 Magnum that has gone through a quick and dirty rest/fixing up, gimme a wave.
He rode this ATV for many years accumulating about 1,400 miles. In 2006, he won a 2006 Sportsman 450. The Magnum has sat ever since. Outside.
About a month ago, the whole ATV has come apart and a thorough going through has commenced. Carb was seized, stator was junk, brake hoses were cracked, master cylinder/handle frozen, rust on the ATV, rusted fender screws.
A little over a month in and the thing runs, and sweet. Fresh oil change, fresh ATF+4 in the trans, new chain and sprockets, all new brake pads and caliper rebuilds, new -3AN braided hoses for brake lines with appropriate fittings, new brake handle and master cylinder, new grips, new (used rebuild) Mikuni carb, new Kenda BearClaws, new stainless bolts/nuts for the fenders, new stator, plug and a bunch of other misc odds and ends.
Will be at Tall Pines ATV park June 9th. If you are there and see some big fella riding a green 95 Magnum that has gone through a quick and dirty rest/fixing up, gimme a wave.
Best place to buy parts
I bought a fixer upper trail boss 250. Where is the best and most reasonable place to purchase replacement parts that aren’t cheap pos’?
Good deal on a 2013 800R outlander max, known issues?
I just found a nice outlander max 800R 2013 locally, 5 min away from my house.
200 miles, almost never used.
My only concern is that it's a 2013, so it's 5 years old.
Price makes sense, and it's got skid plates already, battery is new and oil change has just been done.
Are there any known issues with the 2013 800R or it's a good quad? I have a 2005 400 and that would be a nice upgrade for a reasonable price, considering I can re-sell the 2005 one.
Opinions? How good is a quad with that low km but 5 years old? (never mudded, never plowed, just used for some trail, and not much, so it basically just sat there 5 years).
Thanks
200 miles, almost never used.
My only concern is that it's a 2013, so it's 5 years old.
Price makes sense, and it's got skid plates already, battery is new and oil change has just been done.
Are there any known issues with the 2013 800R or it's a good quad? I have a 2005 400 and that would be a nice upgrade for a reasonable price, considering I can re-sell the 2005 one.
Opinions? How good is a quad with that low km but 5 years old? (never mudded, never plowed, just used for some trail, and not much, so it basically just sat there 5 years).
Thanks