hey guys id like to order angel eye / halos light for my outlander 2018 xtp the one with remote or bluetooth to change to color of it , anybody have a link ? im not finding any provider with remove\bluetooth thx .
2018 sportsman 570 eps
Added winch paper work said to hook up the solenoid to hot wire that has voltage with the key on can’t find one that keeps the volts with the key on only with it off Kolpin 2500 lbs winch
EPS fuse keep blowing
Having a problem with my 2018 sportsman 570 eps blowing eps fuses does anyone have any ideas
2018 Sportsman XP Hard ride
Oil blowing out of breather vent
My boy has a 2010 DS90X and after the rebuild we are noticing a lot of oil blowing out of the breather vent. The vent comes off the drivers side of the head and normally goes to an air injection pod. We removed it years ago along with grinding off and welding shut the port on the exhaust. Now the tube from the port on the head straight up to a regular breather vent that is attached inside the left front tire. The engine at high rpm blew oil out and covered the inside of the wheel well and all over the side of the engine. I checked the dipstick before we left and it was full. About 2 hours of riding and I noticed it was down 3/4 way on the dip stick. After riding it was off the end but I can still see a little looking in the oil hole. The engine has good power and starts well. Any idea what could be causing this much pressure or oil leakage at this location?
Rear cargo box, fender protectors and foot pegs
Looking for some direction on a 2017 Cam Am XMR 650. I purchased a Kimpex Nomad box and I have no idea how to mount it in the plastic rack. Also the fender protectors and foot pegs kit. Does any one have a video or pictures of how to attached all this? Thanks
exhaust change
has anyone changed there exhaust from a duel to a single just wondering if its gonna hurt it or will i lose hp
Still having 4wd issues….
01 sportsman 500 H.O
My 4wd will not engage. Last night i pulled the driverside (left if your on it) hub apart. Found metal shavings in the oil. Yanked the hub, all bearings look good, but the hub clutch has gouges around the backside, however, all seemed to be working properly with the clutch itself.
However, the armature plate doesnt fit super tight into the slots, how tight should it fit into it?
Secondly, how hard should the armature plate stick to the magnet? It stuck but i was still able to peel it off by hand.
The passenger side isnt working either, at all, havent tore into that yet.
However, my speedo and AWD light is working, so i wouldnt think its electrical? But maybe? Ive been reading and reading and still cant really figure out WTF to check.
Im to the point of rebuilding both sets of hubs, but i dont wanna spend 200 bucks doing that if its a friggin wire somewhere.
My 4wd will not engage. Last night i pulled the driverside (left if your on it) hub apart. Found metal shavings in the oil. Yanked the hub, all bearings look good, but the hub clutch has gouges around the backside, however, all seemed to be working properly with the clutch itself.
However, the armature plate doesnt fit super tight into the slots, how tight should it fit into it?
Secondly, how hard should the armature plate stick to the magnet? It stuck but i was still able to peel it off by hand.
The passenger side isnt working either, at all, havent tore into that yet.
However, my speedo and AWD light is working, so i wouldnt think its electrical? But maybe? Ive been reading and reading and still cant really figure out WTF to check.
Im to the point of rebuilding both sets of hubs, but i dont wanna spend 200 bucks doing that if its a friggin wire somewhere.
ATV is over chargeing
When plowing snow with my Can Am 2012 1000 and using the Winch and lights . Like I always do with no problem .but this time the bike stopped I took it to the dealer . And all the fuses under the seat were blown and the fuse box was melted . The said I was using to much power . But I used the Winch and lights ever since I had it new with no problem . I wander if this will happen again I just put a new battery in the ATV . But no sure if it will let me down when I,am in the woods any Info. Would be helpful thanks .
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
2016 Sportsman 570 efi Battery location…
So my 2016 Sportsman 570 efi battery location is in the most dumbest spot ever, it is in the front of the wheeler on the inside left tire. I am afraid that when it gets wet that is what's ruining my battery. I had to replace the battery after owning it for the 1st year. It wasn't a good battery and the only thing I can think of is because of the stupid location of where the battery sits. So when out mudding/hitting water puddles/holes it's ruining my batteries. What ever happened to having the battery located under the seat back in the day? Why is it located by the left front tire inside? I personally think that's a bad dumb spot for it as you can't have too much fun now because it gets super wet in its location and smacked by whatever weeds that gets in that area. Just was wondering if there is anyone out that who also has this same issue and found a possible way to have that fixed and not have a bad battery every year and what I can do to not have this issue or cause a fire if it were to be wrapped. Thanks in Advance!!