Category: Forum News

I installed a winch on my 2006 800 Outlander Max. When I hooked the battery up the positive cable made contact with the frame for a moment and sparked. I finished hooking everything up and checked the winch, it worked perfectly. Then I went to start the unit, everything came on as usual, the fuel pump pressured up, I hit the start button and nothing! The starter doesn't do anything, I have checked the front and rear fuses and I haven't a clue whats wrong. Any ideas?

I installed a winch on my 2006 800 Outlander Max. When I hooked the battery up the positive cable made contact with the frame for a moment and sparked. I finished hooking everything up and checked the winch, it worked perfectly. Then I went to start the unit, everything came on as usual, the fuel pump pressured up, I hit the start button and nothing! The starter doesn't do anything, I have checked the front and rear fuses and I haven't a clue whats wrong. Any ideas?

I installed a winch on my 2006 800 Outlander Max. When I hooked the battery up the positive cable made contact with the frame for a moment and sparked. I finished hooking everything up and checked the winch, it worked perfectly. Then I went to start the unit, everything came on as usual, the fuel pump pressured up, I hit the start button and nothing! The starter doesn't do anything, I have checked the front and rear fuses and I haven't a clue whats wrong. Any ideas?

How do u like your xrs? What are some issues to be aware of? I'm looking at buying a 2013 maverick XRS it only has 800kms the thing is mint. But I'm torn between the XRS or a commander xmr 1000. Thanks guys. I hope I'm posting where I should be.

I had all my garbage stock shocks maxed out last fall. I spent a day bashing the crap out of my skids and a arms. So as I’m inspecting the damage I notice all 4 corners are at their softest settings! Anyone have this happen to them?

Rookie here so I apologize now if I’m repeating a post.

So I tried to update the PIDD on my Sportsman 850 SP with the latest update. Everything looked great til about tens after rebooting when the “Unable to Configure. Please contact Dealer” message popped up and it covers half the screen basically making it worthless. Is there something I can do to fix this or do I need to contact my local dealer? Any help is much appreciated!

I have a 98 Polaris Sportsman 500 and I don't have any spark at the plug. I turned the engine over and used a test light to see if there was any power coming from the stator and I did not detect any. Can a dealer check the stator to see if it is good off the engine? I just purchased this machine knowing it was a fixer but haven't been able to figure the lack of spark yet. I would appreciate any suggestions on how to trouble shoot the electrical system.

So I was driving my 4wheeler today for a couple of hours. When i stopped I noticed that the plastic at the edge of the rear light assembly had melted the plastic housing and clip close to the storage box. I purchased the bike new in February will they warranty this?

Attached Images

File Type: jpg

20180513_153604.jpg (412.0 KB)

I have no power going to my digital display. it typically displays MPH, gas, drive position, etc...No power at all. Checked all fuses and they are all good. What else can be the problem?

Thank you,

Bob

My 4wd isn't working. The dash doesn't show that I'm in 4wd. I am wondering if this is the switch and how do I test it? Please speak slowly and loudly. Hehe. Also, my 4wheeler spent the night underwater this past winter after encountering some faulty ice.