Category: Forum News

I have an old 1998 Xplorer and when you put it in either L or H it just takes off right way without pressing on the gas. I think the clutch and belt need to be replaced as I dont think anything was done to either at all but just checking to see if there is something else I should be looking at?

Thank you

Going to replace the carb in my 500 HO. I read a lot about the knock offs. Can anyone recommend which one to buy without spending an arm and a leg?

Sent from my SM-G950U using Tapatalk

Hey guys, thought I would add another forum to my book. I am rebuilding my 1992 350L 4x4. It had a barn collapse on it from snow and broke the master cylinder/lever. It seems all the new one are a banjo fitting. I got looking at all my brake lines and I would like to change them out. I think they are 7/16 24. I think the new master is 10 mm by 1.0? I was thinking of going and having new lines made at a hydraulic shop but obviously since i am driving a 25 year old machine I'm not a rich man, anyone got any ideas like converting it all to newer brakes or something?

Hi every one I am new to this Polaris forum. Looking for some help. just put in new rear bearings in a 2005 Polaris scrambler HO, I believe the rear axle has to much play between the rear bearing housing and the hubs, I have tighten the concentric nut as tight as can get, it is on the break disc side. There is about 1/2 inch between the nut and the retaining ring that goes into a groove, when I pull on the axle it has to much play in my mind, am I missing something, is there a spacer that is missing. Any help would be nice.

The 2018 Polaris Sportsman 850 Touring and Can-Am Outlander MAX XT 850 are two of the premier two-up ATVs in the industry to we decided to see how they compare…by the numbers.

ATVs have always been single-person machines, even though the idea of having someone jump on the back and riding with you is something that has been done for decades. The manufacturers took notice and some started offering machines with longer wheelbases and specialized seating that allows for a passenger to ride along in a safe way. A two-up machine is an idea borrowed from the snowmobiling world. It gives the rear passenger a seat that is a little higher than the driver, with separate hand holds and proper foot placement. While both Polaris and Can-Am offer two-up machines of various sizes, two that match up very well are in the 850 class – the Polaris Sportsman Touring 850 and Can-Am MAX XT 850. Let’s see how well they do, by the numbers.

Check it out here: 2018 Polaris Sportsman 850 Touring vs. Can-Am Outlander MAX XT 850: By the Numbers - ATV.com

The 2018 Polaris Sportsman 850 Touring and Can-Am Outlander MAX XT 850 are two of the premier two-up ATVs in the industry to we decided to see how they compare…by the numbers.

ATVs have always been single-person machines, even though the idea of having someone jump on the back and riding with you is something that has been done for decades. The manufacturers took notice and some started offering machines with longer wheelbases and specialized seating that allows for a passenger to ride along in a safe way. A two-up machine is an idea borrowed from the snowmobiling world. It gives the rear passenger a seat that is a little higher than the driver, with separate hand holds and proper foot placement. While both Polaris and Can-Am offer two-up machines of various sizes, two that match up very well are in the 850 class – the Polaris Sportsman Touring 850 and Can-Am MAX XT 850. Let’s see how well they do, by the numbers.

Check it out here: 2018 Polaris Sportsman 850 Touring vs. Can-Am Outlander MAX XT 850: By the Numbers - ATV.com

Hi Everyone,

Im new to this forum, I looking at purchasing a 2010 850xp eps, it has a problem you can move the shifter into each gear and rev it up and the machine will not move. Is this an easy fix or something that will cost a fortune, would it be the belt?

Chris

Hello All,

I bought a Polaris service kit online but failed to notice the engine oil and filter are a different kit. I wanted to change my oil this past Saturday due to the nice weather so I did some research. Some of the info. came from this site.

O.K. I'll get to the question. Are the products I used adequate based on my research? I used Mobil 1 Synthetic 0W-40 oil and a Fram PH6017A filter. I changed it and started 2nd guessing myself so I want to make sure before I ride again.

I have a 600 sportsman twin. Winch won't work and battery light is blinking. Changed solenoid, changed nothing. Any suggestions would be greatly appreciated.

Get Ready! The April 2018 Polaris ATV of the month contest is starting RIGHT NOW! This month we are looking for the best photo that features your Polaris ATV. So get out there, get creative, enjoy some safe riding and take some photos! We welcome everyone including vendors to participate. The winner of the contest is decided by you the community, so stick around for the voting process.

• The photo must be posted in this thread.
• Only one picture will be allowed, so make it your best!
• You must be the owner of the Polaris ATV.
• Please include a description of your ATV with a list of all modifications and enhancements.
• You can only win once every 12 months

Voting will begin around April 15th, 2017 and run to the end of the month. Once the voting ends we will publish the winning photos on the front page and the winners will also receive:

• PolarisATVForums Stickers
• Premium Membership
• $25 Gift Card
• Your bike will be featured on the home page of the site