P-O-S 850 Sportsman!!

So I have a 2015 Sportsman 850 with 1800 miles on it and so far I've had to replace 2 wheel bearings and the voltage rectifier. The starter sounds like its going to blow up when starting and if its warm it turns the motor over slowly. The clutch cover or the back of the case leaks so anytime I go through a moderate amount of water the belt gets wet and starts slipping. Lastly if you don't grease the bushings after every long ride you get play in the control arms. WTF!!!!
80% of my riding is on trail 20% is technical at low speeds, is anyone else having this much issues??
I feel like taking this thing and letting it go over a cliff!

2015 Touring 850 SP EPS Service

Greetings! I am working my way through the maintenance items on my atv and find nothing on the eps other than keeping the unit clean. Is that it? I've changed all the fluids, fresh grease, new filters etc... A visual inspection of the eps shows it to be free of dirt and grime. I've not had any problems with the system but was thinking after three years of maintenance just "keeping it clean" doesn't sound right. So, am I good to go? Thanks in advance!!

John Deere parts for hilliard clutch ? anyone used them?

anyone use the john deere parts for the hilliard clutch parts? Ive seen a bunch of forums about it and it seems like most people using them are for the hilliard clutch in the differential. Anyone know if the john deere parts are available for the hilliards in the hubs?

Video: How to Rear Chain & Sprocket stuff

I made a thread last year on how to replace all the chains on my 1995 Xplorer. Well Photobucket will not allow my pics to be shown, so that thread is dead! I threw a chain and made a video of replacing it. I plan to add more as the thing breaks and needs maintenance.


Replacing the chain:



After that you need to set the tension. Plus every 100 miles or so you need to check it again.


I just winged it, so there are a few terms I use wrong (wrench over ratchet, washer vs o-ring). Oh well.

Fitch fuel catalyst

Anybody using the Fitch fuel catalyst?... I have been thinking about trying it out but never have.

Sent from my XT1080 using Tapatalk

Traxter XT Shifting Sequence

I recently replaced stator on my 2001 XT. In the process, I had to straighten the shift pawl mechanism, which I bent on disassembly. I'm pretty sure I have that back in place and operating properly. But I find that there are only 2-3 gear indexes possible when I ratchet that mechanism. It feels like something has shifted in the main gearbox and will not reset
Without power to the clutch mechanism or something. I am hesitant to put everything together again and find I should have reset something...advice appreciated. There is nothing in the service manual that I can find about this and I really don't want to take the clutch cover off unless needed.

Thoughts? Or maybe I'll soon be making a good MPEM, Stator, etc available for bid.

Thanks

Extreme engine braking

I find the engine braking on my 2018 650 max xt to be extreme and darn near dangerous. My passenger's helmet will crack into the back of my helmet if I don't holler out a warning prior to releasing the throttle. My 2017 570 max xt was nowhere near this bad. Is it possible for the dealer to adjust this?.
Bob

GPS RAM Mount & Side View Mirror

I’ve got a 2016 Sportsman 570 X2 and I’m looking for good ideas to put a Garmin Montana w/Ram Mount and a side view mirror. I’m looking at the handlebars but seems like some much stuff already there that I couldn’t find room. Not fond of the idea mounting the mirror off the front rack extension due to vibration. What do you all do?