Hello, I'm just curious if anyone has any suggestions on any upgrades for a 2017 sportsman 570, I drive through a lot of decent sized mud holes and it can manage sometimes stock but other times it usually just needs more clearance underneath so I'd like to try out a lift and maybe beefing up the axles and getting some bigger tires, so whats everyones opinions on this and what else could I do for a little more performance? thanks
Gear shifting problems
I have a 2007 renegade 800 and it wont go into park. It feels like the gearbox is in park as the bike wont roll but on the dash it still shows it is in reverse. Are there any linkage adjustments that would sort it?
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
2001 scrambler vr wiring help
I have a 2001 scrambler that is not charging. Removed the front body and located the regulator to find the black and brown wire are plugged and the yellow wire is plugged into the harness but has a pig tail that comes out to another set of leads that are not plugged into anything at all. The leads are yellow and yellow with a red strip. Should these be plugged in somewhere?
Line fuel routing + unknown screws
Hello,
Tho weeks ago I disassembled my front of Sportsman 570 from 2015, in order to change old fuel line (the transparent one) with new one (the black one) and I have two issues:
1. The new fuel line should have the same routing as old one? Or should be somewhere else?
2. I have two screws, please see pictures, which I can not figure out from where are coming.
Thank you in advance for helping me .
Tho weeks ago I disassembled my front of Sportsman 570 from 2015, in order to change old fuel line (the transparent one) with new one (the black one) and I have two issues:
1. The new fuel line should have the same routing as old one? Or should be somewhere else?
2. I have two screws, please see pictures, which I can not figure out from where are coming.
Thank you in advance for helping me .
QSC Clutch Kit from RVS Performance – Installation Question?
Need some advice on installing a QSC Clutch Kit from RVS Performance for my 2017 Polaris Sportsman 570 EPS.
Now I know how to do it - there's so many videos on YouTube so I think I'm good to go there.
However - this video below where Ryan from RVS Performance is changing out the spring and weights on the Primary Clutch assemble (1:20). You can see he didn't bother removing the Primary Clutch from the bike - he just kept it on the bike and took off the face plate. That's what I also want to do on my 570. Do you think it's ok?
With the 570 - the Primary and Secondary clutch is on the side of the bike so access is pretty easy - If I don't have to take off the Primary Clutch that will save me having to buy or make a tool to remove it. I just don't want issues with not being able to put the plate back on with the new spring.
What would you all recommend?
Now I know how to do it - there's so many videos on YouTube so I think I'm good to go there.
However - this video below where Ryan from RVS Performance is changing out the spring and weights on the Primary Clutch assemble (1:20). You can see he didn't bother removing the Primary Clutch from the bike - he just kept it on the bike and took off the face plate. That's what I also want to do on my 570. Do you think it's ok?
With the 570 - the Primary and Secondary clutch is on the side of the bike so access is pretty easy - If I don't have to take off the Primary Clutch that will save me having to buy or make a tool to remove it. I just don't want issues with not being able to put the plate back on with the new spring.
What would you all recommend?
New to the Forum from Virginia
Hey everyone, the names Brett 27 years old and live in Buckingham County, Virginia. New to this forum and I look forward to interacting with everyone on different topics and especially if I need help with anything. My wife and I ride a 2015 RZR 1000 XP with various upgrades. We do a mix of riding, mostly mudding but do the occasional trail ride here and there.
Renegade bumper options
Looking at options for a radiator relocate bumper on my 13 renegade. I like the price on the wild boar, but the winch sits way too low. Seems like it would hang up on everything. The xmr model has a much better approach angle, but it installs over the factory winch mount. Does anyone know if it would be possible to install the xmr front bumper on a base model g2 renegade? Would I need the whole winch mount from the xmr? Open to other options as well.
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
2018 renegade xmr1000 plastic issue
Hi everyone,
Just bought a new renegade xmr 1000. Long story short, I got it home and popped the snorkel cover off and saw what looks to be broken plastics.. pic provided.
I bought the only unit like this available in my area (300 miles) and the dealer says with no other units to compare too their not sure if this is how these quads come from factory or if these plastics are damaged.
Can any fellow renegade xmr owners confirm my assumption that someone took their temper tantrum to my quad plastics during assembly?
I appreciate your help!
Just bought a new renegade xmr 1000. Long story short, I got it home and popped the snorkel cover off and saw what looks to be broken plastics.. pic provided.
I bought the only unit like this available in my area (300 miles) and the dealer says with no other units to compare too their not sure if this is how these quads come from factory or if these plastics are damaged.
Can any fellow renegade xmr owners confirm my assumption that someone took their temper tantrum to my quad plastics during assembly?
I appreciate your help!
Another first time Can Am owner
Just purchased a 2018 Outlander 570 - Base Model, the price was right and a 5yr warranty sealed the deal. I'm a made in japan guy, so this is a big first for me. Time will tell, looking forward to educating myself on this forum and meeting some outdoor enthusiasts like myself.
2017 outlander XMR Triple black plastic issues
Any of you guys have this issue with the paint on your XMR it is kind of difficult to see with the reflection but they are developing all over what are your thoughts