Category: Forum News

I'm going to be changing all my fluids out this weekend on my Outlander 570. I have a bunch of qts of Valvoline syn power 75w140 I'm going to be using. It shouldn't matter that they are for limited-slip should it?

The new 2018 Polaris RZR XP Turbo S is the biggest RZR ever built with a massive width of 72 inches and an eye-popping 16 inches of ground clearance.

Fast Facts
Engine: 925cc turbocharged Twin
Power: 168 HP
L x W x H: 122 x 72 x 75"
Ground Clearance: 16"
Tires: 32 x 10-15 ITP Coyote
MSRP: $27,499

Polaris has come to market with the largest RZR it has ever produced – the enormous 2018 Polaris RZR XP Turbo S. This Sport UTV matches the Can-Am Maverick X3 X RS Turbo R with the industry’s widest footprint at 72 inches.

That extra wide stance will come in handy, as the RZR XP Turbo S sits a bit taller thanks to its 32-inch tires. Those new tires help the new RZR achieve a industry topping 16 inches of ground clearance.

2018 Polaris RZR XP Turbo S Preview - ATV.com

"I thought he was kidding when he was going to go over those jumps"

It’s always fun taking “newbies” for a ride in a UTV, but Tanner Godfrey kicks it up a notch when taking his own mother for a ride in a Polaris RZR. Considering she birthed the wild child, you’d think she would have at least some affinity for doing crazy things, but apparently it skips a generation.

Tanner Godfrey Takes His Mom For a Wild RZR Ride + Video - ATV.com

Anybody have any experience with the Wiseco fuel controller? It looks identical to the Dobeck EJK but is about $80 less. I've got a 2012 sportsman 850xp that is completely stock for now, I am just looking to clean up the hesitation on acceleration but plan to add intake and exhaust later on. Any info would be appreciated, thanks.

I traded in my 09 xp for an 18 sp 570. I love it but don't love that there aren't any holes for my lock and ride gun rack on the front. Is there any way to add lock and ride capability to the smooth front storage box/bars on the side of front box/rack extender?

I'm looking for performance mods for this machine. I'd like to reach 100hp. Anyone do any performance mods?

Finally finished installing my backup lights last night. I had to weld up some brackets - but it seemed to turn out pretty good. Lots of light for $20! I wired to a toggle that I mounted near the gauge pod.

Lights that I used:
https://www.ebay.ca/itm/2x-2inch-10W...xZwxkM&vxp=mtr

I am looking any upgrades I can make to the DS 70 to get the most out of the machine.
I am already doing the throttle cable swap. What is the best sprocket set up? Should I make any changes to the clutch?

Hello all, I own a 96 sportsman 500 that I recently acquired from a friend. I’ve done quite a bit of work to it to restore it to its former glory. The tires on it now are the factory Goodyear’s that are dry rotted and cracked like crazy. I have a set complete set of 12” rim tires off of another quad with less than 50 miles on them. However... the rear rims are a 10” on the sportsman. I’ve been researching a solution for almost 2 months now off and on and can’t come to a solution.

I want a factory looking set of Polaris wheels to fit the 4/156 bolt pattern in either a 12x8 or something close. I’ve found through endless searching there are quite a few 12x8 factory Polaris equipped quads but the offset is what worries me. I’ve asked a few people on eBay to measure the offset on some used rims and they get snotty and don’t give me the information I need. The offset that I measured on the stock 10x8.5 rim was around 3 outside 6 inside.

If anybody knows of a factory 12” rim that will fit without using spacers that has a suitable offset and the correct bolt spacing I would greatly appreciate it. I’ve just really need to get this scratched off my list. 2 used rims for ~30 a piece is a lot cheaper and looks better than 2 brand new 10” tires.

Thanks in advance for any help.

I am parting out my 2006 sportsman 800. It only has 2290 KM on it. All parts are currently available. The engine was running perfect before I took it apart. Video available of it running. Transmission went on it so decided to part it out now. The engine will be sold complete and and ready to drop in and run minus the clutches. For prices please txt or call 780 898 4140