Category: Forum News

Hey guys, new owner of a 2014 XMR 1000 here, was wondering if all of the plastics on the gen 2 outlanders are the same? Mine came with the cao and I really would like to change it to a different color. Not a big fan of camouflage. Also, to fit on the xmr, would the plastics have to come from a 2 seater? Or would it be the same as a single? Thanks in advance.


Sent from my iPhone using Tapatalk Pro

I have a 2004 Polaris Sportsman 400 with a Polaris Warn 2500 lb. Winch on it for my plow. The winch hasn't worked for a few months now and I really need it fixed for plowing the snow we're getting up here in Pennsylvania.

The problem is that the winch doesn't work at all. When the button is pressed, there's no clicking or any other sound coming from anywhere. Completely dead. My battery is putting out 14 volts according to my multi-meter. I've also already tried a new winch solenoid and that didn't fix the problem.

Tonight, I took the winch completely off the ATV and did a test on it. I used a car battery (charged and ready to go) and jumper cables to give direct power to each of the terminals of the winch. Isn't the winch supposed to spool up or down with direct power? Mine did literally nothing. Didn't move or make any sound. Can someone tell me what to do from here? I'm stumped. Does this mean the winch is completely fried? Thanks in advance for any advice.

Just wondering if anyone knows if they make a 2" adapter for the '17 '18 Sportsman 1000?
I am not looking for the adapters from the 1 1/4 to 2" I am looking for the kind of one that replaces the small one and gives it a permanent 2"

The small 1 1/4 just seems too weak, I want to beef it up a little if I am going to be hooking up a 2" receiver.

Thanks in advance for any information.

My dad purchased a 2013 outlander 1000 and I recently installed tracks for him. It has OEM clutch with Maverick belt. Any thoughts on a good clutch kit for it. It is really jumpy getting started from a stand still. I am familiar with Dalton clutches a little. Any ideas on a clutch kit for this machine. I am partial to Dalton, but would welcome all feedback. Thanks for everybody's input.

Went out on the bike today put it in reverse to get out the yard the back wheels started spinning something didn't sound right I looked down at the transmission it looked like it was hopping does anyone know what it could be

Found a set of rims at a good price how can I tell if they will fit the guy don't know what year they came off of

Attached Thumbnails

 

I have a 2007 Sportsman 500 dlx. I am trying to replace the rear CV boot which requires pulling the axle out. All I have seen on You Tube shows a Clamp (snap ring) that you have to remove for it to pull out. Mine does not have this clamp? How do you get it out of there and back in? I appreciate any answers.

I have a 2015 Sportsman 570 EFI (1,110 miles). Removed the transmission to find the chain tensioner was at its max. The pins that connect the links of the Silent Chain wear which causes the chain to be longer. When the tensioner can no longer keep the chain tight, the chain slips on the 19T sprocket. This is what is causing the loud popping noise. The factory replacement is 3234057 and is $140-$200 depending on where you get one. My problem is I am trying to find an aftermarket alternative. The chain has 86 pins and is 11 plates wide. Any thoughts or part number on another chain that will work?

99 Magnum 500. 4600 MILES. lots of new parts. Runs amazing for the mileage. New oil in everything.
Just replaced:
Brakes
Master cylinder
Hub coil on one side front(proven to work in awd)
Rear tires mud lite AT stock size
3500lb winch (50')
Built rack for front very nice.
New cv boots.
Cv joints rebuilt
Bearings in front cleaned and reassembled
Lights: 32 in on front and 6" flood on back
( the side lights broke after the first ride so I took them off)

Again motor runs great so I didn't do anything to it. This thing goes through a lot. Tows good 1 7/8 ball. All gears work good. The pull start broke off but elect start good. The straps over the armrests are handles for passenger.
Speedo and all works except N light but easy to tell. In MILES!! No mods to this I know of. Plastic is old due to year but very good shape very minimal cracks.

Ownership. Still insured. Serious buyers can test drive. Can deliver within reason and for fee. Comes with free M helmet. Call or text or email. Located 10 minutes south of Tweed, ON and about 25 m north of Belleville, ON. 6394701088
3500$$ Make an offer

Attached Thumbnails