Need help!! I’m replace the water pump seal and oil seal and I’m having trouble with the water pump impeller. Does anybody know for sure if the nut on the end of the crank shaft is reverse thread and also when I try to take the nut off it just spins the crankshaft which turns the motor. I’m working on a 2005 Polaris Ranger 500 which I’m told is the same as the sportsman’s. Any help would be great I really don’t want to pay to have it worked on. Please and thanks
2018 Can Am Renegade 1000 xmr EJK INSTALL
Newbie trying to install a EJK what does there injector wires look like and how many is there to unplug. HELP PLEASE
Outlander 570
Hey guys looking for input on the Outlander 570. If you have owned or presently own one I would like to hear your opinions on them please. Thank you
Dent in Rim
What is the best way to get large dent in a rim? Thanks John
2011 650 XTP, Front Diff question
OK, this is post #1 for me here.
I've worked on cars a lot, but this is my first ATV/bike, though I've ridden (friends') for a long time...
I found a really good deal (we'll see) on a low-hour 2011 Outlander 650 XTP.
Story has it, it was mostly used for snow-plowing, which is why there is corrosion on quite a few of the bolts.
It does show signs on the frame bottom having hit some stuff, but definitely not what I would call bad.
I bought a Ricochet skid plate set and put it on yesterday.
While I had the front end way up in the air, working on the bottom, my front diff started "oozing" fluid out along the front drive shaft.
Is this "normal" when you have the front end lifted up near vertical ? (ZERO drips when level.)
- or is this the first sign of a worn/scored wear sleeve & seal that need replaced ?
I've worked on cars a lot, but this is my first ATV/bike, though I've ridden (friends') for a long time...
I found a really good deal (we'll see) on a low-hour 2011 Outlander 650 XTP.
Story has it, it was mostly used for snow-plowing, which is why there is corrosion on quite a few of the bolts.
It does show signs on the frame bottom having hit some stuff, but definitely not what I would call bad.
I bought a Ricochet skid plate set and put it on yesterday.
While I had the front end way up in the air, working on the bottom, my front diff started "oozing" fluid out along the front drive shaft.
Is this "normal" when you have the front end lifted up near vertical ? (ZERO drips when level.)
- or is this the first sign of a worn/scored wear sleeve & seal that need replaced ?
Anybody Riding in Arkansas this weekend?
Looking for some good place to ride this weekend
To Snorkel -or- not to Snorkel
I have a 2018 Outlander 1000 XXC. I’m debating if I should snorkel it. I don’t plan on ever taking it swimming I ride mostly trails and occasionally like to play in the mud. I have gone through puddles or water crossing that are over the floor boards.
My main concern is keep the CVT dry. As far as I know everything else is high enough not to cause issues (correct me if I’m wrong here). What does everyone recommend?
Thanks
My main concern is keep the CVT dry. As far as I know everything else is high enough not to cause issues (correct me if I’m wrong here). What does everyone recommend?
Thanks
Best Outlander model
Hey guys. Loaded question, I know but what is everyone's opinion on the best Outlander model?
(Size, reliability, recall issues etc, etc...)
(Size, reliability, recall issues etc, etc...)
parts info needed
Hey guys
just wanted to ask if anyone know the bolts needed for the REAR RACK EXTENDER,FLATBLKWRKL
1014768-418
my rear rack vibrates and when I carry some wood from the back and use tie downs it pulls the front corners out of the holes. need to get two bolts to bolt it down .
anyone know the size and thread?
alot to ask but I tried online and only can find new racks
https://www.polarispartshouse.com/oe...ax-ay-az-al-at
this has the rack but not the bolt needed.
thanks for any help
Glenn.
just wanted to ask if anyone know the bolts needed for the REAR RACK EXTENDER,FLATBLKWRKL
1014768-418
my rear rack vibrates and when I carry some wood from the back and use tie downs it pulls the front corners out of the holes. need to get two bolts to bolt it down .
anyone know the size and thread?
alot to ask but I tried online and only can find new racks
https://www.polarispartshouse.com/oe...ax-ay-az-al-at
this has the rack but not the bolt needed.
thanks for any help
Glenn.
fox shocks
has anyone found fox shocks for 17 sportsman 1000 xp? thinking about elka stage 4 just looking at other options