Category: Forum News

So I am going to wire up my heated grips and a light bar in the next couple of days. One of the two orange wires located under the light pod has a second orange one coming off of the end of it. Not sure if something else is tapped into that or if its normal? It goes right back into the main harness. Just want to see if there is one better than the other to use for the light or the grips or if it just doesnt matter?

Hi - looking for ideas. I have an oil leak on my 1999 - 2 stroke - Polaris Scrambler 400 4x4. A mechanic that I don't trust says "It's leaking from everywhere - it's not worth fixing" - I find that hard to believe, there can't be that many places it could be leaking from - could there? It's not gas/oil - just oil.

Thank you for your ideas.

I have an Outlander Max DPS 570 (2017!! & yes I've had the re-call from BRP)
I'm planning to get a set of Apache 360 (not LT) for it.

I'll be using it in the hills in Scotland for deer stalking (red deer) in the winter.
I'll need to trailer the outfit from home to hill.
So, in order to work out what trailer I'll need and comply with EC towing regulations I need to know the all up weight of my Outlander (with fuel) and tracks fitted.

But although the Apache's are described as "light weight" I can't see anywhere what weight they actually are.

I know my Outlander dry weight is listed as 336 kg (741 lbs)
So if I can find the weight of tracks and fitting bits I can add that and subtract the weight of the four wheels and tyres. Then add the weight of fuel and oil!

I suspect with my little European car (Dacia Duster 4x4) that will mean a braked trailer, but without the actual outfit weight I can't be sure.

Can anyone help?

thanks,

Alasdair

p.s. moderators I tried to post this topic a couple of days ago but it doesn't seem to have got to you!
If this is a double post please ignore this!!!

Hey guys, I’m looking for a set of new or like new 12” factory bead lock rims from a 2013 and up Renegade. I have the yellow beadlocks on it now with my stock tires and am looking for another set for my aftermarket tires. Thanks.

Just got my plow installed on my new 2017 570 SP and everytime I winch the plow up or down i lose the lights on my gauge pod. Anyone experience this? I also noticed that the mode switches to the tach once in a while when plowing and using the winch. Its been tough to turn over the past few times ive ussed it. Could the battery be going bad after a couple hundred hours total on the machine? Can I put my trickle charger on the non sealed acid battery? I always did on my sealed batteries and this is my first non-sealed one.

thanks!

Has anyone else had there access cover crack? 016 570 I only have about 60 miles on quad getting it ready for sunday to go riding and found this.

weights? Most machines do not involve as much of the synergistic maxx boost tissue (supporting maxx boosts) as totally free a lot do. And, therefore, do not become much maxx boost tissue. Synergistic maxx boost tissue are small sized maxx boost tissue that aid the primary maxx boost tissue in stability and sturdiness in each improve. Machines has its uses, but for beginners and for smashing plateaus, use totally free a lot. Fitness Tip #5 Workout with material exercises Compound exercises are exercises that involve 2 or more mixed movem maxx boost ents and thereby employing bigger maxx boost tissue and more synergistic maxx boost tissue. Regular clicks, dead increases, the go, and weights waves amongst others are fantastic material exercises. For example, when you go, all the maxx boost tissue in your decreased whole human maxx boost get coaching and that alone is about 60 percent of your overall musculature. Squat also works the rear again and abs too. Using more maxx boost tissue at one go indicates that you get a better overall perform out. To add icing to the cake, because of the large utilization of the maxx boost tissue, you will pant, huff and sweat more. That indicates your routine also has a aerobic effect and you will get rid of fat even time after you stepped out of the gym. Fitness Tip #6 Are you working out your legs? Your is programmed to develop proportionately with only slight variations. If you do not exercise you, your chests maxx boost maxx boostweight will stop increasing before it becomes huge. Surely, you've heard of poultry legs! Just because leg coaching can be brutal, it does not present you with objective to hide you in your pants. To get that super hero X-frame, pepper your routine with the go. A word of caution though: material exercises such as dead increases, the go, and frequent clicks must be done in outstanding kind and a spotter is highly recommended. This is where well being and wellness and fitness and wellness instructor will come in handy as your spotter. If not, accidents are bound to occur and that may put you permanently out of the gym. Fitness Tip #7 What are you eating? Maxx boost developing needs necessary proteins - the more, the better. Meat, especially red maxx boosts and fish, are the best resource. It is in meals that your whole whole human maxx boost will draw healthy and balanced value from, for durability and necessary extra fat for mixed and organ protection. To have large muscular acquire and help in muscular preservation, you need about 2-3 grms of fine necessary proteins per kilogram of your maxx boost maxx boostweight. If you want to get serious about maxx boost tissue, you may need to enhance them with necessary proteins shakes. Eating meals and having a necessary proteins tremble immediately after coaching period also maximizes the window for rapid absorption of healthy and balanced value. This is critical as you need to feed the maxx boost tissue now that you have broken them. You should also 6 little meals a day so the maxx boost tissue are consistently fed throughout the day. This will help rev up your metabolic process to lose fat too. This will tremendously help you in your get attractive shed maxx boost maxx boostweight system. Be sure to take your .

https://myhealthpeak.com/maxx-boost/

I'm trying to take off my primary clutch and it's spinning off again the bar I have in there to hold it when I turn the clutch puller bolt.

The back plate is still spinning as the clutch spins off so I'm not putting any pressure against the crank.

I can get my clutch puller out and screw the front the front of the clutch back on, but have no idea how to secure the entire thing now to get the puller to do it's job.

Has anyone experienced this before?

2011 Polaris 500 HO. Was plowing snow when I noticed a loud knocking noise coming from front end when in AWD, doesn't do it in 2X4. In very low speeds in AWD doesn't seem to happen either. Where should I start?

I searched the threads and all of the battery posts seems quite old. I have a 2012 850xp and I need to replace the battery. Are there any options available that are decent besides the Odyssey battery? The cheapest I can find it is 165 bucks. I am hoping for something AGM for $100 or less? I can't seem to find out what size battery will fit. So does anyone have any new Odyssey alternatives? Something stronger than stock but not crazy expensive.