Installing a QSC clutch kit I bought from member Double_J (excellent seller by the way). My question is about the buttons in the secondary, are they bad enough to need replacing or do they have some life left? Included a picture of the helix too.

Attached Thumbnails

   

Hi, So I have a 1999 Sportsman 500 that the original owner said the AWD did not work. I checked all the wiring and have the 23 ohms to both coils, I have 13.5+ volts with it running going to both coils. I have taken them apart to verify parts. All the parts look correct, the armature plates looked a little worn so I replaced them. The cam/rollers/spring all look in very good condition and are smooth. When I test it with the awd on, the armature plates magnetism is working and they hold very well. I put the cam on without the hub and turned the wheels slowly in awe and the rollers do move outwards.When I put it all together it seems like the rollers/cam isn't grabbing the hub at all. I can't figure out why the front awd will not work. All the parts seem to be working correctly.

I am wondering, is it possible that the inside of the hub is too worn or too large that the rollers aren't grabbing? I wondered if possibly someone switched the hubs at some point, but I checked all models between 1995 and 2004 on the parts diagram and they all use the same hub so I have eliminated this.

Any help would be greatly appreciated.

Hi, So I have a 1999 Sportsman 500 that the original owner said the AWD did not work. I checked all the wiring and have the 23 ohms to both coils, I have 13.5+ volts with it running going to both coils. I have taken them apart to verify parts. All the parts look correct, the armature plates looked a little worn so I replaced them. The cam/rollers/spring all look in very good condition and are smooth. When I test it with the awd on, the armature plates magnetism is working and they hold very well. I put the cam on without the hub and turned the wheels slowly in awe and the rollers do move outwards.When I put it all together it seems like the rollers/cam isn't grabbing the hub at all. I can't figure out why the front awd will not work. All the parts seem to be working correctly.

I am wondering, is it possible that the inside of the hub is too worn or too large that the rollers aren't grabbing? I wondered if possibly someone switched the hubs at some point, but I checked all models between 1995 and 2004 on the parts diagram and they all use the same hub so I have eliminated this.

Any help would be greatly appreciated.

Hi, So I have a 1999 Sportsman 500 that the original owner said the AWD did not work. I checked all the wiring and have the 23 ohms to both coils, I have 13.5+ volts with it running going to both coils. I have taken them apart to verify parts. All the parts look correct, the armature plates looked a little worn so I replaced them. The cam/rollers/spring all look in very good condition and are smooth. When I test it with the awd on, the armature plates magnetism is working and they hold very well. I put the cam on without the hub and turned the wheels slowly in awe and the rollers do move outwards.When I put it all together it seems like the rollers/cam isn't grabbing the hub at all. I can't figure out why the front awd will not work. All the parts seem to be working correctly.

I am wondering, is it possible that the inside of the hub is too worn or too large that the rollers aren't grabbing? I wondered if possibly someone switched the hubs at some point, but I checked all models between 1995 and 2004 on the parts diagram and they all use the same hub so I have eliminated this.

Any help would be greatly appreciated.

Hi new to this forum so I’m unfamiliar with my suspension? I have a 2013 1000 XMR Outlander which I just bought and since being on this site I’ve been hearing horror stories how bad the fox air shocks are! I just checked out my XMR Shocks and they are Elka brand is this stock? And is this a good thing for me? And could someone tell me what this dial does in picture? Any info would be great thanks!!!👍🏻

Attached Images

File Type: jpeg	994EB7CC-4169-479C-930D-1B2522E0B1CB_1522429089162.jpeg (1.14 MB)
File Type: jpeg	60FFDFC4-A880-4A86-B92C-B02250DA3DAE_1522429116397.jpeg (1.19 MB)

What would be the strongest and best spray paint available for painting some plastic bumpers?

Sent from my SM-G930F using Tapatalk

Hi,
so i bought a seat for my atv, i matched it on partzilla, but i get it and it doenst even lock onto the latch... it looks like it should fit but it doenst latch... anyone know why?

Anyone know if there is a width restriction on Smittys Trail ? I'd like to stay in Gorham but don't want to have to trailer (my sxs is 62") up to jericho. Thanks