Hey guys,

I'm looking into purchasing a new quad and have been giving deep thought to a 2017 HL 850. Ill be spending 90% of my time in mud holes and 10% on the trail traveling to other holes. My primary question is how hard is the quad to steer without EPS. Also i've been quoted a phenomenal price for an XMR 650 and a decent price for an XMR 850 how does the HL compare to those two quads? Thanks!

Hi guys,
New to the forum here and looking into buying a new quad here soon. I've been indecisive between the 650 XMR, 850 XMR and the Polaris Highlifter 850. I can get a pretty fantastic deal on a 2017 650 XMR but my main concern is how noticeable is the extra power on the 850? I mainly mud ride and am not much of a trail rider. My main complaint on the Polaris is it doesn't have power steering which is a bummer. Thanks for the help.

Okay guys tried to go riding tonight. 07 outlander max 800. New belt new clutches new helix new side cover. Took for a quick five minute spin did great. Then later went to go riding with a buddy in the snow, rode it down the road a few miles and it lost forward gear. Heard what sounded like slapping belt. Wouldn’t go forward in high or low. But would do fine in reverse no irregular noise at all. Took cover off didn’t see any issues. All was tight and looked good. It was half hour later by this time. I put back together , and I had forward gear. But only for 30 seconds if that. Then the slapping continued. Still reverse is fine. My buddy said he saw sparks coming from the center rear end area. But I wonder what could that have been. Left it at his house for the night. Will dive more into it tomorrow. But figured see if you guys had any ideas. It’s a gates carbon belt. Belt looks perfectly fine. At this point I’ve had nothing but issues from this atv. Seems like a curse. I’ll admit it’s a new belt and I didn’t go easy on it. First couple shot rides around my neighborhood I went easy on her. But after that was a higher rpm road ride. I literally am stumped. I have another new belt a gates Kevlar. Maybe will swap them tomorrow and try to limp her home.

Has anyone tried to install a Warn 91810 "Universal" Plow Mount on a 2001 6x6 Sportsman? How'd it work out?
Looking for something to fit my new (old) ATV.
Thanks in advance.
Dan

I have a 2016 DS90, starts hard idles for a bit than dies. Idles fine when warmed up sometimes. When it is idling and you stab the throttle it cuts out and dies unless you let off the throttle. When its on full choke and you stab the throttle it won't cut out. All stock just cleaned carb new fuel filter. Is there somewhere on here that this has been discussed? The screw on the intake side has been adjusted to 1.5 turns

Sent from my LG-H900 using Tapatalk

I’m not far from needing some tires
2013 outlander 800r XT max. Currently have 27” big horn originals. I’m wanting a more aggressive tire but not a mud specific tire. I have 12” wheels


Sent from my iPhone using Tapatalk

My idiot move recently is to lose the one and only key I had for my Sportsman. Does anyone know if dealer's can make a new key based on VIN or do I have to change the whole switch assembly?

Howdy friends,

I had my GoPro running while I did 3 full-throttle to top speed dashes on a ride this past Saturday. This Sportsman belongs to my boss/friend. He bought it used, it has a little over 1000 miles on it, and he wanted me to "test it out"...so I did. I was able to 65mph three times in a row...any additional speed would have taken more space than I had. I am impressed by the pull of the 570. Great power. Steering gets nervous/"twitchy" above 55mph.

He has started advertising the new bumpers for the 2017 2018 Polaris Sportsman 850-1000. They look awesome and tough as hell. They bolt in 6 spots instead of 4 like the Polaris ones. I recommend going to his site and checking them out for yourself. I have mine on order already, and I already cant wait.:grin

I thought I would put this on here to let people know, I have been watching his site for as long as I have had my 2017 Sportsman 1000 ( roughly 6 months ) for him to make a bumper for these machines, I am glad I waited.

I posted a couple of pictures he sent me, enjoy.

Attached Thumbnails