Author: Forum News

I have a 2011 xmr with the built in air compressor. Im pretty sure its available on some of the 2011-2017 models too.


Does anyone know if the actual hose end fitting is universal? I do not own a canam hose so have never actually used it. I wondered if I could buy any hose with a quick coupling on?


Something similar to this

https://uk.rs-online.com/web/p/pneum...lings/0497817/


Or is it a canam specific fitting so I cannot buy just any hose?

My name's Cory and I own a 2018 Outlander XMR 850 and a 2017 Renegade XMR 570. I live in NC and mainly ride at ATV parks like Outback, Busco, and Cape Fear. I do all my own work on my machines. I joined this forum in hopes of adding to my limited knowledge base of rotax motors and can ams in general. Hope I can help as well.

I have a 2003 Traxter 500 which has developed a severe oil leak at the weep hole of the pull start housing. I'm guessing it blew an oil seal at the crankshaft but have not pulled it down yet. Has anyone had this problem before? I would like to get the parts ordered and delivered before tearing it down.

From the schematics that I have seen it is difficult to determine what the part number is so was wondering if someone could forward the part number and what gaskets are needed to reassemble and where to buy them? I have the Bombardier 2002 Shop Manual (704 100 013) but it does not have a schematic nor a procedure for replacing the oil seal. Is there a better one available some where?

Thanks in advance for your help
norm

Hello,
Glad to be a new member to the forum,
I Own a Commander XT 1000
I live in VT and do most of my riding in New Hampshire, The trail system is very poor in VT so its well worth the trip to NH.
Hope I can be helpful here

I'm new to the forum; I've read several over the years but have never joined or posted to one before.
Bought a 2005 Sportsman 500 HO a few months back and have enjoyed it so we bought a new Sportsman 570 EPS for the wife last week.
Hope to learn a few new maintenance tricks and maybe help with a question or two.

Just purchased 2015 outlander xmr the front shocks were gone when i purchased it. I replaced them with the oem shock and now the bike hits hard on both extension and retard is this normal for this model??and if so does anybody have a fix.any help would be awesome thx.

My outlander blew a timing chain so I replaced both chain, guides and 4 valves. changed oil and drove about 60 miles and lost power and bottom of motor started to knock. But yet it idles great with no engine noise and no engine light on. Any ideas?

What does everyone use to compress the springs? Is there an ATV sized coil spring compressor?? I need to replace the rubber boots at the bottom of my front struts.

Hey guys, I've got a 2016 Maverick and I've noticed what I thought was typical clutch noise has gotten significantly louder, not sure if it is due to a problem with the clutch or what. When I removed all the plastics I pulled the intake tube for the belt box and am about 99.99% sure that's where the whine is coming from. Any thoughts???

Well the XMR is going to cost me some mi way again lol. Me and a buddy had the day off today so we decided to go ride. Went looking for mud and found some. Deep and thick. Everytime I got completely stuck I would get a bad grinding noise. Watched some videos that my friend took of me and the grinding only happened whenever one of the front wheels stopped turning. I have power to all wheels and no issues or noises, until I bury it. If I am very easy on the throttle I can see all the wheels moving but if I hit it to hard while stuck one wheel stops spinning and I get a nasty grinding noise. I believe it's the visco because 4x4 climbing some steep hills and over obstacles I do not get any weird noises or problems. Everything runs fine with nothing strange that I noticed.

I am thinking of getting a torq locker and just taking the visco right out. Anyone have experience with these. I know a lot of people use them mudding. How are they climbing rocky hills or anything you may have to turn on while in 4x4. If you have one. How do you like it and what about it do you not like?

Sent from my Pixel 2 using Tapatalk