My son asked for signals and a horn. Rear signals LED’s are mounted “in” light fixture. About $85.00 for everything. Picked Mouser pins and will try to connect signals to Instrument Cluster.
Magnum 425 4×4
Just got this quad and am having troubles getting it to go out of awd any ideas?
2015 canam outlander 1000 xtp
Killer quad, could not live without the 1000 cc's between my knees! Hope I can give as much help as i get from this forum. You boys are good at what you do!
Is this a good deal on a 450 DPS ?
$6,000 with two year warranty and no dealer fees . Any info on the 450 would be great . Will use for trail ridding and light mudding .
17 Sportsman 850 (CHecking for Trouple Codes)
Help needed. My 850's check engine light came on the other day. I was told there is a method of pulling trouble codes up on the display. Is this true? I'm looking through the manual and can't find anything on how to do it.
2015 outty 1000 high temp/limp home mode.
What are most causes for this, hightemp limp home mode, to occur? I've done some research on these forums and others, it would just be nice to have a list to refer too so I can check everything over and try to figure out what's going on with my outty! I'm going to go home today and remove the rad completely, give it a good wash, then check my thermo and water pump are working good. Any other ideas on what I can do or check on 'er? Any ideas will help!
This problem has happened before but most times it was just a plugged rad from mud, so it was surprising to see it was clean, with my coolant level at a good level. The only other thing I did/changed on the outty was the rear wheel bearings before this problem occurred.
Any help and ideas will help boys!
This problem has happened before but most times it was just a plugged rad from mud, so it was surprising to see it was clean, with my coolant level at a good level. The only other thing I did/changed on the outty was the rear wheel bearings before this problem occurred.
Any help and ideas will help boys!
Round 4 – Ironman Raceway Recap – ATVMX National – 2018
Crud Stoppers
I just ordered these for my XP 850.... They are supposed to seal up the wheel bearing area from mud and water and triple the life of you're wheel bearing's. For 35.00 I figured I'd give them a shot. Found them on Facebook so we will see how it goes.
That Helpless Feeling of Killing The Motor in The Air + Video
That Helpless Feeling of Killing The Motor in The Air + VideoHaving your motor cut out while in the air is an unsettling feeling. More than likely this guy tapped the rear brake before he had the clutch lever pulled all the way in. In this instance, it’s best to hold the clutch in so as not to land with your rear wheels locked up. That’s exactly what […] more
96 Xplorer (New to me)
Good morning I just purchased a 1996 Xplorer 400 with about 500 miles on it. Electric start doesn’t work but pull start does, battery looks ancient. Throttle cable looks to get loose at certain times also. I am looking to do a complete change of all the fluids before I start riding it. I have downloaded the Polaris service manual but it is very vague in terms of the finding the drain and fill plugs. I will attach some pics of my machine in the hopes you all could steer me in the right direction. I appreciate the help.
I believe I have found the transmission and the counter balance fills but cannot find the oil, transmission, gear or counter balance drain bolts.
I believe I have found the transmission and the counter balance fills but cannot find the oil, transmission, gear or counter balance drain bolts.