So I recently acquired a 2001 Scrambler 90 that was traded in for next to nothing non-running. I’ve run in to an issue and I’m stumped. The atv idles smooth but won’t take throttle and bogs. It stays running and will accelerate without any load (wheels off ground) but it bogs even with moving just it’s own weight. Carb cleaned (multiple times) and checked out - I even swapped with another carb I acquired and same symptoms. Stator checks out - checked gap on pickup. Tried running from a remote fuel tank to eliminate fuel supply issues - same symptoms. New plug. Low RPM tab was removed from CDI. Compression is solid (115) Looking for insight/ideas. Thanks!
Protecting the Future of ATV and UTV Riding with the Yamaha Outdoor Access Initiative
Protecting the Future of ATV and UTV Riding with the Yamaha Outdoor Access InitiativeWe get a close up look at how the Outdoor Access Initiative helps more
2018 Steele Creek GNCC FMF Youth Recap
xp 1000 idle lopes when on high idle!
Ok so my atv has had a small lope when on cold idle occasionaly if I blip the throttle when it's doing this it seems to clear up, no engine lights no driveability concerns. Do notice it does take a extra cranking when cold, I'm leaning towards a tps issue? Or an iac, And I'm really hoping not signs of a timing gear spun, I currently have 2900 miles and 189 hours,
Has anyone else experienced this?, once warm it runs just as it should,
Has anyone else experienced this?, once warm it runs just as it should,
Cherry Creek NV
In September of 2017 myself and two friends traveled to Cherry Creek NV. We loaded the quads, my 16 Sportsman Touring 1000, a 2000 Polairs Sportsman 500 and a 2002 Grizzly 600 and headed into the mountains.
We established a base camp on BLM land about five miles north and 4000 feet higher than the town. From there we made daily trips that included some private ranch lad (with permission), the Pony Express trail and established trails through BLM land.
We rode the Pony Express Trail out to Butte Station. Butte was a former PE station that had been overrun by Indians twice. There we sat under Juniper trees and watched three different groups of mustangs come into water at a natural spring.
Overall a great trip, we saw no other riders and the few local people we did see we very friendly.
We established a base camp on BLM land about five miles north and 4000 feet higher than the town. From there we made daily trips that included some private ranch lad (with permission), the Pony Express trail and established trails through BLM land.
We rode the Pony Express Trail out to Butte Station. Butte was a former PE station that had been overrun by Indians twice. There we sat under Juniper trees and watched three different groups of mustangs come into water at a natural spring.
Overall a great trip, we saw no other riders and the few local people we did see we very friendly.
Speed vs RPM’s
I have a 1000 Highlifter and am thinking about getting a power commander which will remove the rev limiter at 7500 rpm. What is the redline for the regular 1000 or what rpm are you at when going 60mph?
Speed vs RPM’s
I have a 1000 Highlifter and am thinking about getting a power commander which will remove the rev limiter at 7500 rpm. What is the redline for the regular 1000 or what rpm are you at when going 60mph?
That is Certainly a Well Built Roll Cage + Video
That is Certainly a Well Built Roll Cage + VideoIf you’re looking for a venue to torture test products, just about any rock racing event will do. This one in particular is the Southern Rock Racing Series event held at Dirty Turtle Off-road Park. It’s unfortunate he had to get off the throttle, but it doesn’t look like he did much damage to his […] more
Which UTVs Have the Most Horsepower?
Hello from Australia
Hi Group
My name is Paul, I am a mechanic (cars) but are starting to get a few bike through the shop Polaris is one brand.
I thought I would join up and learn a thing or two about them, I have a few issues now and then and I have found the
best place sometimes are forums to nut the issues out.
Cheers
My name is Paul, I am a mechanic (cars) but are starting to get a few bike through the shop Polaris is one brand.
I thought I would join up and learn a thing or two about them, I have a few issues now and then and I have found the
best place sometimes are forums to nut the issues out.
Cheers