Author: Forum News

Hi folks. Im new to this forum. I was looking for a recommendation for a roof and windshield for 2017 Defender. I was in shock when I saw the prices for the average roof. Come on! $400-$500? Isn't it just a molded piece of plastic and some clamps? A darn winch is cheaper than that. Also looking for a reasonably priced windshield. Im not sure if I would want glass or plastic. Im not looking to buy cheap junk but I suspect that someone out there must have some better prices than Ive seen so far. Any advice appreciated. Thank you

i have a 2000 expedition. 4WD is not working. Ifound the 2 wires that go to each hub and i am not getting 12v at the connectors by the steering compartment. Is there a fuse? Is the AWD switch just a 12v switch maybe i can jump the wires out and get 12v to the connectors?

Hey guys, I recently picked up a 2003 sportsman pretty cheap;however, it has no spark. I believe it is the cdi, but I want to make sure. It is the ducati one, and I read that's not great. About a week ago, I found a post somewhere that had the resistances to test the cdi, but no matter what I try I cant find it now. Does somebody has the method of testing the cdi?

Also, I am not 100 percent sure what engine this has, the seller told me it was a 700, but he also said it was a 2006 and it is a 2003 so I want to double check.

Thanks in advance! Ryan

my polaris 200 has a stripped head bolt what is the best way to go as of fixing this?:sad

I recently bought a mildly used 05 sports 500 ho with ebs, and I have the notorious clutch dragging problem. I have done the research and learned that it could be alignment, the wearable washers in the primary or even the front motor mount. One thing I am looking for clarification on is something I read on a different forum that caught my attention. I read that the clutch off a 2007, I believe was the year, 800 Efi sports primary would fit. My question is, Is there a primary clutch that will fit and get rid of those wearable washers so I can have a better solution to the dragging problem?

I installed a full set of the Fox Evolution shocks on my 2016 Outland DPS (these are the $500 set from Can Am's accessory catalog) Since the shocks are mounted inverted, (with the shock body mounted up near the fender) I'm a little worried about the heat coming off of the exhaust on the left rear of the machine might damage the shock. Does anyone make a heat shield for the left rear shock to shield it from the exhaust pipe?

Good morning!
New to the site..own a 2016 Outlander L Pro 570

Looking forward to browsing here.

What years are interchangeable? Need one for an 03 sportsman 700. Most of the ones I see on ebay are 96-00 or 02.

Headed to woods this am , about 28%, headlights went out, bike stayed running
Ck engine light came on. Restart ok when I parked.
Did notice this am it only started in position (key) with no headlights.
Original battery
2013 outlander 1000
Any thoughts

Hello all,
My machine is a 2004 sportsman 700 that I purchased in the summer for plowing use. I'd like to purchase low cost chains for it (amazon or ebay seems to have many for approx $55 shipped) but I'm not certain if my tires are stock/upgraded or who knows what as this is a used machine.

can anyone guide me how to proceed for correct sizing?
I see links like this one: and am wondering how and where to measure the amazon listing sizes of 54" x 14" etc theres 56x16 and so on ....

https://www.ebay.com/itm/ATV-Tire-Ch...haGyDo&vxp=mtr

https://www.amazon.com/54-KIMPEX-Spa...s=p_36%3A-7500