snow is almost all gone, took the bike out of the shed yesterday. Am going to change the oil, went to the local bolt and screw place to get a washer and all they had is a solid aluminum washer so picked one up. Any concerns about using this instead of the copper crush washer?
Race Driven MudRat Rotors Worth It?
Hi guys,
Are the Race Driven MudRat Rotors worth the upgrade cost for hard mud riding on a 1000XMR?
Are the Race Driven MudRat Rotors worth the upgrade cost for hard mud riding on a 1000XMR?
Struts
Got a 04 outty 400 one strut is shot and other one is a grizzly. Would like to do another grizzly strut but they sit Low. Any lifts kits or other struts?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
1000XMR Race Driven MudRat Rotor Review
Hi guys,
Are the Race Driven MudRat Rotors worth the upgrade cost for hard mud riding on a 1000XMR?
Are the Race Driven MudRat Rotors worth the upgrade cost for hard mud riding on a 1000XMR?
Wife said new tires is a go!!!!!
So I have a 2016 Outy Max XT 1KR. I'm very interested in ITP Cryptid and SATV Intimidators. I'm torn on what size to get, was going to go with the 30x10x14 but might just drop to 28x10x14. Living here in Fairbanks Alaska area things are a little swampy going for those Moose and riding some of the trails here. I just not sure about changing the A-arms, I will do the spring spacer and that is planed into this event. Just looking for opinions for those who have either of these on your bike or have had experience with them. Also for the front what offset would I need to be looking for on the new wheels?
Thanks,
Gary
Thanks,
Gary
water breathing ordered
So, ebay was running a 13% off deal for a seller and with my ebay bucks and ebates I ended up purchasing a snorkle kit (pn: 715002392) for my 2017 outty 850 xt. Yes I already have moved over to the XMR hand guards, so I don't have to worry about that. Ordered the loctite 5900 they suggested too. Looks to be a minor PITA. Wonder how I'll end up cutting below the pod... was thinking hack saw or razor. I also have a dremel I could use.
Anyway, I'll be the only one in the group, so I can test the water to make sure they won't swamp their machines. Looks like a load of work to install. An afternoon and hand tools + or - the dremel if applicable. Anyone have any watch out for's or do's for this kit that might not be included with the instructions?
Anyway, I'll be the only one in the group, so I can test the water to make sure they won't swamp their machines. Looks like a load of work to install. An afternoon and hand tools + or - the dremel if applicable. Anyone have any watch out for's or do's for this kit that might not be included with the instructions?
Chad Wienen Earns Ironman ATVMX National Overall Win
The 2019 ATV Motocross National Championship (ATVMX), an AMA National Championship, made its way to Crawfordsville, Indiana this past weekend for the 5th Annual Ironman ATVMX National. With inclement weather in the forecast, the AMA Pro ATV motos were moved up to 1 p.m. and 3 p.m., however the weather would make an appearance before the second moto took off the gate.
Chad Wienen Sweeps Motos at Ironman ATVMX National
CFmoto Hunt The Wolf 2019
Six seater Defender windshield problem
Hello,
New here. With the full windshield installed the occupants set inside a vacuum for dust and debris. I removed the bottom center fastners which allows me to tilt the windshield out. This eliminates the vacuum and allows air to pass directly over the dash board and into the cabin. I cannot find any arms or brackets that will hold this windshield in the open position. Need some wisdom here. I can’t be the only person who is tired of being covered with dust.
New here. With the full windshield installed the occupants set inside a vacuum for dust and debris. I removed the bottom center fastners which allows me to tilt the windshield out. This eliminates the vacuum and allows air to pass directly over the dash board and into the cabin. I cannot find any arms or brackets that will hold this windshield in the open position. Need some wisdom here. I can’t be the only person who is tired of being covered with dust.