Author: Forum News

Who has any manuals fo 2005 800EFI Sportsman that you car to share. THANKS

Picked up a 04 500 and have been going through everything since it’s been sitting for 10yrs, changing all the fluids, parts missing etc. took it for a ride around the yard in the snow and noticed the front wheels were not engaging. The light for the awd lights up on the speedo but the wheels are not engaging

i want to take the oil pump off my scrambler 400 to gas oil mix it and was wondering what all do i need to take off i took the pump cover off and 2 screws on the inside and it wont come out

setting shock sag, should all 4 springs be equal to each other? i have a friend who said the rear springs should be set 1.5" higher than the front, is this correct?

Hey guys, just joined and need some help. Have a 2016 Outlander XTP 1000 that won't start. thought it was the battery, but had it checked out and it was fine. It's cranking over but won't start. Maybe fuse, if so where did they hide it. Any help appreciated.

Hey guys,
I just picked an 06 Hawkeye with a cracked subframe. I was wondering if anyone has put a 07 or newer subframe on theirs and if it worked?
Thanks in advance!

I have a 2016 Ranger 570 Crew mid-size. The ride is a little rough and I adjuted the rear shocks to the lowest setting, but I dont see a way to adjust the front. Am I missing it or is there no way to do so. Thanks

I purchased a 2009 Polaris Sportsman 850 XP EFI EPS with right at 100 hours on it. I noticed it a little before I bought it, but now it has me worried.....it smokes for about 3 minutes after startup, when cold.....white/grey smoke.

I drained the oil, even though it was said to have been changed 2 months ago by the dealer, and it looked like it was very old oil. Either the dealership didn't change it, or it got dark very quick.

So my worst fear, is water/coolant getting into the engine....but I did not see any water in the oil. I did a compression check, and its around 210 on both valves.

Could it just be that the atv is 10 years old, and hasn't been ridden much? If thats it, can I use something to flush the engine?

Looking for some info on getting the most out of the 650.

I can do a clutch kit, or a cv tech primary. I am leaning towards the primary, but need to know the springs and weights to start off with.

My bike is a 2019 XMR 650 with 29.5x8 Assassinators, otherwise stock.

CVT's are a new breed of animal to me.

Thanks!

Koomafloo.

Looking for some info on getting the most out of the 650.

I can do a clutch kit, or a cv tech primary. I am leaning towards the primary, but need to know the springs and weights to start off with.

My bike is a 2019 XMR 650 with 29.5x8 Assassinators.

CVT's are a new breed of animal to me.

Thanks!

Koomafloo.