News

A few easy questions.

I have a 2008 renegade and I wanted all four lights to come on but it sounds like that mod is a bad idea. Do the Newer renegades have that option now? I’m seeing a lot of videos online were all four lights are on.

How about the outlander, do all 4 lights come on in high mode?

Also I find it annoying that the headlight switch is with the key instead of on the handlebars. Do the newer models have the headlight off switch moved to the handlebar?

Thanks

I'm looking for a replacement outer half primary clutch. PN is 420 28 0467. I've looked all over (eBay, craigslist..etc) and can't find one. Anyone have one laying around?

I was part of this forum a while ago. I got started with some Facebook groups but I always like this forum better. I look forward to reading what's new. We have a 2008 outlander max 800 and a 2004 400.

Sent from my SM-N920V using Tapatalk

Just picked up my 2018 hd10 6 seater. Any suggestions or need to knows?

Hello ladies and gentlemen. I am new to the forums here and have purchased my first atv. I purchased a 2017 Polaris Sportsman 850sp new. Hopefully I will not be creating threads in the repair section too often. Lol. From what I've seen you people have some great looking machines.

Got engine code 1902 and 842 dies soon as give gas. Anyone know what this code is

Hello everyone. Iam wanting to do a home made snorkel on my machine this winter. Cant right now since the quad is in a storage unit and dont have a garage. What iam wanting to know is the parts used( size and how many) going to be using pool hose so it's not going to be hard piped. If anyone has pic on how they did theirs I'd really appreciate it. And any tips also. Thanks for your time.

I had an issue with my cooling fan not kicking on and traced it to the temp sensor on the radiator. I replaced the part and brought the machine up to temp and it kicked on. Problem solved, at least I thought until the fan didnt turn off. The first time I just pulled the plug after everything was cool to the touch. I tried again and waited 15 minutes after shutting off the machine before pulling the plug to the sensor. An infrared thermo showed the surface temp of the radiator was at 64 degrees when I pulled the plug. Once pulled I immediately plugged it back in and the fan stayed off. It seems like once the sensor completes the circuit it won't open again until power is cut.
Could this be a defective sensor?

2005 outlander max 400.

Scott

I had an issue with my cooling fan not kicking on and traced it to the temp sensor on the radiator. I replaced the part and brought the machine up to temp and it kicked on. Problem solved, at least I thought until the fan didnt turn off. The first time I just pulled the plug after everything was cool to the touch. I tried again and waited 15 minutes after shutting off the machine before pulling the plug to the sensor. An infrared thermo showed the surface temp of the radiator was at 64 degrees when I pulled the plug. Once pulled I immediately plugged it back in and the fan stayed off. It seems like once the sensor completes the circuit it won't open again until power is cut.
Could this be a defective sensor?

2005 outlander max 400.

Scott