News

Hello everyone, new to the forum and have I a question...

I´m about to restore a 2005 Polaris 500 ATP from my grandpa. Model No A05JD50AA
The problem is the ATP, is in a complete disassembled state so I looking for the service manual.

So far I can only find the service manual for the model no: A05MH42AH A05MH50AH A05MH59AK A05MH68AK and A05CH50FB but not for the A05JD50AA
Or can I use those service manuals for the A05JD50AA

I´m looking specifically for the wiring diagram and the carburetor assembly.
If someone could point me to a service manual for the 05 500 ATP it would be much appreciated.

Sorry for any spelling mistakes. I‘m from Germany

Thanks in advance...

Nico

I have a 2015 650 xmr I bought the bike needing motor rebuilt and I've put it just like it was when I got it other than it has all new parts so it's a 650 with Maverick heads and some kinda cams 860 mrrpm kit new crank new timing chains new spark plugs new crank case bearings the issue is it's running on one cylinder but it will run on both cylinders but not at the same time I can take the front wire off it runs idles on the back cylinder bit when you give it some gas it acts like it's getting to much fuel okay well if you take the back plug off it runs on the front cylinder it runs good takes the gas like it should just won't idle any suggestions timing is right I've checked it a 100 times got fire got gas just won't run on both sides at the same time ????? Please help

Before I start yes I’m a super noob. First time atv owner. Just picked up a trailboss 325. It was buried in snow all winter. Yesterday I put gas in it. Started 2nd pull (electric start doesn’t work) took off and died 30 seconds after. After struggling to get it started again it did the same thing. Went at it again today and it didn’t start at all and I noticed this small tube leaking gas by my back tires (pretty sure it’s coming from the carb) I attached a photo to give you guys and idea on what I’m talking about any ideas and fixes? I have 2 days to get this issue fixed so I can hit the trails on opening day. Any advice is welcome

Attached Thumbnails

 

Going riding Friday. Where is a good place to park in the SNIRT Run area and easily see the roads and trails??? Taking the wife and kid. Thinking about Towpath Restaurant for lunch and then we hit the trails.

Hi, first time poster here. I have a Polaris 400 HO 2008 that has a carb problem. Worked fine until it wouldn't start and smelled like gas. Though it was flooded so I left it alone for an hour. Tried to start it and wouldn't crank, neither through the pull cord as though it was seized. Took the side off and noticed the carb was dripping gas from two places (see picture). The air intake also had about a cup of gas in its bottom. So I'm thinking I was unable to crank it because the cylinder was filled with gas. How would you go about fixing that problem? Does it need a new carb or just a carb kit?

Thanks.

Hi all
Just joined the forum. I live and ride in the black hills of SD, I have a 2014 outlander 500XT with dps (bought brand new) and a 2014 renagade 500 love both bikes but my outty is my favorite. Looking forward to visiting with h some of you and making new friends, if you have any questions about the black hills shoot me a pm I’ll try and help.
See you around

What size are the castle nuts at the end of each axle on a 2017 Sportsman 450?

I have a 97 sportsman 500 since it was new. I have an oil seal leaking behind the water pump(dripping out the weep hole). Can this seal be removed and installed without splitting the case? Clymer manual says the case has to be split. Also the tool to reinstall the mechanical seal for the water pump is discontinued. My local dealer says they do not work on older Polaris anymore. Guess they want you to buy a new one. My machine runs perfect and has alway been properly maintained. I have never had to ad oil between oil changes. It has never left me stranded. Its been all over the mountains of Colorado elk hunting and hauled countless number of whitetails out of the field of Texas, Illinois,Kansas. I brought my 2 boys up riding on it. I have a strong attachment to this machine.

I have a front strut that is leaking. Should I replace it with a Polaris brand OEM strut or replace both front struts with the less expensive aftermarket struts while I'm doing it?