News

2004 sportsman 400. I've put new real calipers, new rear master cylinder. All good - but then I ripped the brake line (long story.) Called my dealer, $90 (plus tax) for a simple 38" brake line. That's insane

Anybody have suggestions on how I can do this brake line for less than that? Looks like a pretty standard braided steel brake line.

2015 Outlander 650xt. I was wondering if anyone have a modification to keep your right foot from getting wet when going through puddles of water? Water always seems to splash through where the rear brake is. It's kind of annoying just wondering if someone put kind of metal or something there to divert the water.

I have a ‘17 Renegade XMR 570, what are my options for a rear rack? I see Wild Boar has one that says fits all models, I also see people with the LinQ system from can am. I’m open to all options just trying to figure out what works and what doesn’t, thank you!

Hello is a tourqe sensor in the power steering unit fixable. That is the code I get. Thanks

Hello there
A few months ago the intake side of my piston and cylinder got scored up badly while riding and only had 30 psi. Still not 100% sure of cause but maybe water in or low oil? It was very cold that day so maybe oil froze up? Why only top/intake side? Anyway yesterday I finished putting a new piston and cylinder in. Got it stated up and would kind of backfire and sputter and sometimes shut off after. If I used the key to shut off it would back fire as well. I believe all the backfiring was from the carb. Also after the backfire where the header and main pipe connect would start blowing white smoke. The pipe seemed very hot for only a few seconds of running too. Does this sound like my cam is off one tooth on the chain? Is the smoke assembly lube burning up? Wouldn’t it be more blue then? As you can probably tell I’m not the best with four strokes so any help would be appreciated. I might try to get video later today. Thanks, Erik

Anyone have any experience with this plug and play rack and drop basket.
It seems like a great alternative to getting the replacement Polaris tube metal rack and then ordering a drop basket for it.
Seems with this I could easily switch to whatever suits me best.



Sent from my iPhone using Tapatalk

hello all i have a 2001 sportsman 400 and i am tired of dealing with the Hillard clutch and bearings im tring to find a replacement for the front strut or a cage so to speak to delete the Hillard all together im fine with all time 4x4 all i do is mud ride so i dont care about the stress on drive line and axles i go through them like beer anyways it would be nice to find a drop in strut with full time hub engagement any suggestions will be great

Anyone ever do just the front? Installed 27" Bearclaw HTRs on my stock wheels (9" front, 11" rear) and had a little rubbing so I installed a 1" pipe lift on the front only. The rears have plenty of room and the machine sits pretty much level. Just wondering if there is any downside to running like this.

Dose some one know the engine weight? Trying to decide if I need an engine life in removing it or if I can do it with just two guys.