I have a 1999 scrambler that I put a new cam in. The Exhaust lobe was almost completely gone on the old cam making it run really bad and back fire through the carb. So I got all the timing marks Lined up and pulled the old cam put the new cam and rocker assembly in adjusted the valve to .006. Put it all back together. And now it won’t run. Changed spark plug and checked it for spark. It’s getting gas. And if I pull the plug and turn it over a few times and put the plug back in it will pop over once and the it will just turn over and not fire. If I choke it or hit the throttle it will stall out the starter Immediately. Any help would be greatly appreciated thank you
How to carry a small outboard motor
Does anyone have any ideas regarding carrying a small outboard on a 570, other than securing it to front or rear racks. I have an old 14ft alumunium boat that I leave in @ certain hard to reach small lakes where I fish trout. When I want to go for a quick or late fish all I have to take on the quad is the motor, fuel and fishing rod. I was thinking about possibly using the rear trailer hitch in some way. Any ideas would be appreciated.
Adam McGill Claims First Win of 2018 at FMF Steele Creek GNCC
Round four, FMF Steele Creek, of the 2018 AMSOIL Grand National Cross Country (GNCC) Series, an AMA National Championship, took place Saturday, April 7 in Morganton, North Carolina. The Steele Creek GNCC is a track that is well known to turn your race plans upside down, and this year’s race would prove to be just another one in the long list of historic finishes that pad the reputation.
Go Deep Snorkel install video
Here is a video of installing the Go Deep Snorkel kit.
Sent from my Pixel XL using Tapatalk
Sent from my Pixel XL using Tapatalk
ATV’s for our younger generation
Got two kids in middle school. Not much available these days for proper fitment. Got a Polaris sportsman 90 and a grizzly 125 as of now. Older son looks like a gorilla riding a football on the 125 and the sportsman 90 has the worst brakes in the world. Honda's 250 seems like the right size but the transmission is dated and who wants to shift gears these days. I might just try a Kymco product. The 270 is the same bike as the Kawasaki 300 and the artic cat, just different fenders, but a cheaper price. Anyone got any experience with these?
ATV’s for our younger generation
Got two kids in middle school. Not much available these days for proper fitment. Got a Polaris sportsman 90 and a grizzly 125 as of now. Older son looks like a gorilla riding a football on the 125 and the sportsman 90 has the worst brakes in the world. Honda's 250 seems like the right size but the transmission is dated and who wants to shift gears these days. I might just try a Kymco product. The 270 is the same bike as the Kawasaki 300 and the artic cat, just different fenders, but a cheaper price. Anyone got any experience with these?
95 polaris explorer 400 sputters when accelerating
Hi all, im new to the group and polaris. I recently picked up a 95 explorer 400 4x4. Its starts hard unless you use carb spray. With carb spray it fires right up, once its running it idles ok. The main issue is, it sputters bad accelerating and has no power. I replaced the sparkplug and went through carb. Carb was clean. Air screw was at 1 1/2 turns. I tryed turning it out and in and sputter was the same. Any input would be appreciated.
WT….. Is this normal?
Hey folk, needs some help here, the other day I was adding some accessory light switches on the instrument panel. When I removed housing right behind the instrument panel, right behind the high beam light, I see these 3 hoses jetting up?? Is this normal. I just got my 18 back from the shop and was wondering if they forgot to re-attached these. Please see pix
tia,
tia,
2018 sportsman xp lava orange
Has anyone bought a lava orange atv? If so let's see some pictures of it.
Sent from my SM-N950U using Tapatalk
Sent from my SM-N950U using Tapatalk
a-arm replacment
I am replacing the A-arm on my sportsman 570. the service manual is stating to use new bolts (due to the locking compound is already on them). so would there be a problem if I used the old bolts and Blue 243 lock-tight?

