Does anyone know of any private trails in southern Michigan or Northern IN. I spend my summers near Sturgis MI and are looking for some trails for a family to ride ages 7-69, we are non drinkers or smokers so we will not be leaving any trash behind.
06 Outlander 400 Cold Start issue
Hi,
The winter seems to be tough to warm this machine up. Sometimes it can take over 10 minutes before I can turn the choke off and drive it. It is cold... 20's to 30's.
Anyone know what I can do to troubleshoot this issue? It seems to be fine in warmer weather but it has been tough in the winter.
I recently replaced the carb, fuel pump, gas filters so the fuel system is all brand new at this point.
Any ideas that what to troubleshoot? The bought this machine in October of last year.
Thanks,
Craig
The winter seems to be tough to warm this machine up. Sometimes it can take over 10 minutes before I can turn the choke off and drive it. It is cold... 20's to 30's.
Anyone know what I can do to troubleshoot this issue? It seems to be fine in warmer weather but it has been tough in the winter.
I recently replaced the carb, fuel pump, gas filters so the fuel system is all brand new at this point.
Any ideas that what to troubleshoot? The bought this machine in October of last year.
Thanks,
Craig
12 inch wheels for 2001 sportsman 500 HO
I want to change the rear 10 wheels that came on my atv to 12 wheels. What do I need to do?
Any 2018 Sportsman 1000 problems?
Ok, you guys with the 2018 1K's...One last query before I leap...Are you all having any problems with the 2018 YM machines? If so, what? How many miles/hours and how have you used it?
I've been keeping an eye on the 1K machines since it was introduced to see what bugs show up. From what I can tell, Polaris seems to have pretty much corrected most of the issues common on the first couple years models for the 2018 YM.
Please let me know what you think and any issues you've had before I jump.
I've been keeping an eye on the 1K machines since it was introduced to see what bugs show up. From what I can tell, Polaris seems to have pretty much corrected most of the issues common on the first couple years models for the 2018 YM.
Please let me know what you think and any issues you've had before I jump.
Any 2018 Sportsman 1000 problems?
Ok, you guys with the 2018 1K's...One last query before I leap...Are you all having any problems with the 2018 YM machines? If so, what? How many miles/hours and how have you used it?
I've been keeping an eye on the 1K machines since it was introduced to see what bugs show up. From what I can tell, Polaris seems to have pretty much corrected most of the issues common on the first couple years models for the 2018 YM.
Please let me know what you think and any issues you've had before I jump.
I've been keeping an eye on the 1K machines since it was introduced to see what bugs show up. From what I can tell, Polaris seems to have pretty much corrected most of the issues common on the first couple years models for the 2018 YM.
Please let me know what you think and any issues you've had before I jump.
2018 Sportsman 850 SP?
Me and my fiancé have found a brand new 2018 sportsman 850 SP for 9500$ out the door costs. but we don't know very much about quads, we have never owned one but we have been riding for years. Is the 850SP a good solid quad? I'm looking for reliability. Of course I know there is some maintence on any quad you will own but I am asking more towards duration of it lasting. I don't wanna spend 9500$ if the quad is gonna fail within a few months. Just wanna hear some people's thoughts about the 2018 850 SP, is it worth it? Is it reliable? Is the 850 better then the 570 as far as reliability goes? I know of course the 850 has better specs then 570 but I am focusing on being reliable. Hope to hear from you guys!
FS: 14” Hiper Sidewinder DBL Beadlocks Wheels (NIB)
I run a Polaris Scrambler 1000.
I purchased (4) wheels (Hiper Sidewinders) for the Scrammy, (2) were right with (2) being wrong. I’ve since purchased (2) others to complete my set.
I do not have 100% confirmation of this yet, but from what I know to this point the (2) with wrong bolt pattern are apparently for a Can Am. The box they came in even claim 4/156 so they were clearly boxed wrong.
In any event, I’m posting them here to see if there is any interest once I find out exactly what machines they fit.
They are 14x7 and are brand new with all oem hardware. I’ll also confirm offset, but I believe they are 5+2.
Next post will have actual pictures and confirmation of fitment.
These are being offered anywhere from $359 and up per wheel from what I can see. I’d sell both for $300 + shipping.
I have same username over on Polarisatvforum.com if you guys want to check in on me as this is my first post.
Shane
I purchased (4) wheels (Hiper Sidewinders) for the Scrammy, (2) were right with (2) being wrong. I’ve since purchased (2) others to complete my set.
I do not have 100% confirmation of this yet, but from what I know to this point the (2) with wrong bolt pattern are apparently for a Can Am. The box they came in even claim 4/156 so they were clearly boxed wrong.
In any event, I’m posting them here to see if there is any interest once I find out exactly what machines they fit.
They are 14x7 and are brand new with all oem hardware. I’ll also confirm offset, but I believe they are 5+2.
Next post will have actual pictures and confirmation of fitment.
These are being offered anywhere from $359 and up per wheel from what I can see. I’d sell both for $300 + shipping.
I have same username over on Polarisatvforum.com if you guys want to check in on me as this is my first post.
Shane
Jumping a Sportsman 570 EFI (video)
Hello friends,
This past weekend I took a ride on a friend's Sportsman 570 and along the way I found some fun small jumps. I'm impressed at how nicely the 570's suspension soaks up these small jumps.
This past weekend I took a ride on a friend's Sportsman 570 and along the way I found some fun small jumps. I'm impressed at how nicely the 570's suspension soaks up these small jumps.
Battery drain
Hello,
Last September we bought a 570 Sportsman EPS for my wife. Brand new, 0 miles. Since day one, we have had battery issues. So I replaced the factory battery with a sealed battery from Advance Auto Parts. Completely charged the new battery prior to install. If the bike sits for more than a day, this battery is also dead. There are NO aftermarket electrical accessories added to her machine. Only new wheels and tires. Only thing not factory on the electrical system is a battery tender plug connected to the terminals under the headlight. I have the plug connected to the ground post (far left looking at the bike) and constant hot (far right looking at the bike). The middle post is unused.
What could be causing this battery drain? We turn use the handlebar on/off/on switch as well as using the key.
Thanks in advance for any help you can give.
Sent from my iPhone using Tapatalk
Last September we bought a 570 Sportsman EPS for my wife. Brand new, 0 miles. Since day one, we have had battery issues. So I replaced the factory battery with a sealed battery from Advance Auto Parts. Completely charged the new battery prior to install. If the bike sits for more than a day, this battery is also dead. There are NO aftermarket electrical accessories added to her machine. Only new wheels and tires. Only thing not factory on the electrical system is a battery tender plug connected to the terminals under the headlight. I have the plug connected to the ground post (far left looking at the bike) and constant hot (far right looking at the bike). The middle post is unused.
What could be causing this battery drain? We turn use the handlebar on/off/on switch as well as using the key.
Thanks in advance for any help you can give.
Sent from my iPhone using Tapatalk
Help High/Low Beam Issue
I have a 2017 Can-Am Outlander Max XT 1000 and have a question about the high/low beam headlights. When I switch the high beam on, the low beam bulbs turn off. Should the low beam stay on when the high beam is switched on? I can't say for sure if it was like this from day one or not because I haven't noticed. I do have a friend with a 2014 and both high and low beams are on when high beam is switched to the on position. Is there a problem with the switch or somewhere in the circuit? I know they changed the switch at some point, not sure if it was 2015 or 2016. Thanks for any input.