polaris runs rough 1/4 throttle

Hey guys new member my sons polaris had been sitting several years because bolts back out of stator and chewed up stator and flywheel just got one from ebay used installed it runs perfect but at 1/4 only when hot breaks down. It seems like spark but only after about 1/2 hour of driving new plugs carb is clean any ideas would be great thanks again

Kailub Russell Earns 48th Win at VP Racing Fuels Big Buck GNCC

Day two of the AMSOIL Grand National Cross Country (GNCC) Series, an AMA National Championship, racing action took place today, February 25, at the Big Buck Farm in Union, South Carolina. Rain showers would take place earlier in the morning, but cloudy and cool conditions would make for the perfect conditions at the 1 p.m. pro bike start.

Kailub Russell Earns 48th Win at VP Racing Fuels Big Buck GNCC

Day two of the AMSOIL Grand National Cross Country (GNCC) Series, an AMA National Championship, racing action took place today, February 25, at the Big Buck Farm in Union, South Carolina. Rain showers would take place earlier in the morning, but cloudy and cool conditions would make for the perfect conditions at the 1 p.m. pro bike start.

2015 outlander 450 L

Im just wondering if anyone knows any problems that come with a 2015 outlander 450 L? Im thinking about buying a used one with 86 miles and for $5000.

i would appreciate the help!!!

2015 outlander 450 L

Im just wondering if anyone knows any problems that come with a 2015 outlander 450 L? Im thinking about buying a used one with 86 miles and for $5000.

i would appreciate the help!!!

06 Outlander 400 fuel issues

I got back from my vacation in Hawaii and when I went to fire up the Outlander I could not get it to start. It is a fuel issue so I have been looking into what is going on with the fuel.

I put a new fuel pump and carb on the other day and it seems to not prime the carb for some reason. If I open the air box and spray some starting fuel it will fire right up and run amazing.

I see 2 issues right now:

1. The choke is not working. I am not sure if there is something wrong with the new carb or something was connect wrong when I install it. Thoughts?

2. I need to put starting fluid in to get it started so it is not priming the carb at startup.


Any advice to solve this issue?

Thanks,

Craig

New bolt for CVTech primary?

Planning on installing this clutch on my 2018 Renegade 1000. Will I be able to reuse the stock bolt? I read someone had a issue on a 2017 XMR with the stock bolt being too long. Anyone hear of this?