News

I've got a wiped lobe on a 2000 magnum 500. How are the aftermarket cam/rocker kits off of ebay? Do they last? If the dealer cam's are having problems then why would you put in the same part? Whats a good aftermarket cam and rocker?

https://www.ebay.com/itm/POLARIS-NEW...RZMZBi&vxp=mtr

I asked this on face book the other day but I want to verify before I have the tires mounted. I bought 12/7 itp steel wheels 4+3 back spacing. I have 26/9/12 for the front tires. I threw the wheel on just to see and it looks like it's going to be tight. If anyone can give me a solid yes that they will fit that would be awesome. Don't want spacers if at all possible. Thanks in advance.

I have 25 hours on this bike it’s 6 months old this week. I’ve noticed on the last few rides it has struggled to start, Like the battery was going bad. It normally stays on a trickle charge but has not been on it now for the last three weeks. Took it out for a ride on Sunday started just fine the first time turned it off would not start. Had to jump start to get it back in the trailer.
Question is am I doing something wrong with the kill switch and the key Fab or do we have a bigger issue?
I do not always use the Killswitch I just pulled the key five off the post. But what I realized on Sunday is I will put the key Fab back on the post without turning the kill switch to the off position. Maybe this is a really stupid question but would that draw power from the battery?


Sent from my iPhone using Tapatalk

Just found this in my center skid plate under the engine/gearbox, does anybody have any idea what its from? Not sure if its something important lol







thanks

For the life of me, I cannot figure out if these will fit. They say in the description "fits G2 and G2S". Mine is considered a G2L though. I even went to the dealer yesterday and he couldn't even tell me for certain. I literally stared at a 650 max model parked right next to a 450 model and the shocks themselves looked identical, well at least size wise. The shocks are different part numbers in the book though. I'm running a "pipe lift" right now and I'm not entirely happy with the results.

Has anyone ever put HD springs on an "L" model?

Can Am ATV Heavy-duty Front Springs -

Idea #2..... Just buy 4 springs from an Outlander L Max model. The shocks in the parts manual have the exact same part numbers.... however, the springs have different numbers. I'm assuming Max springs would be heavier duty than the base model. And I know they'd fit for sure.

Hey

I have a 2012 Sportsman 850XP. I lost drive without any warning. Found out that input shaft had broke down.:sad I would like to find out a reason before I install new shaft and rebuild transmission. Could it be a problem with drive coupler spring damper? It is a bit loose but I cant find any information how it shoul be. If anyone here has heard about similar problem, I would be thankful for any advice :smile

Picture also here:
https://1drv.ms/i/s!AiKwU6Qs3uWftVsYJFGu7Shdyanl

2006 Polaris Outlaw 50
1,395.00
Perfect Christmas Present!!
This Machine is in excellent condition. Had only one tank of gas ran through it. If you are interested in this machine Stop down to 642 Main Street, Limestone, NY. or call (716)701-1868

Attached Thumbnails

       

I like to break out my "ideal tire groover" from time to time. I had good results grooving the super swampers on my old wheeling rig (a 1 ton K5 blazer on 44's) and I was happy with the ice traction after siping the BFG mud terrain tires on my daily driver for better snow performance. So the next logical step for me was to try grooving and siping my Silverbacks for better snow, ice and rock traction...

I used a #3 round blade set to 1/4" depth for the grooves and a #5 blade set to 1/4" for the sipes that didn't show up very well in the picture. I think they look similar to the Silverback Xlites.

So far, I haven't noticed any chunking and the performance has increased slightly.
I may cut the grooves deeper in the spring if I don't see any excessive wear.

Attached Images

File Type: jpg

CAM03540.jpg (1.78 MB)

Below is a picture of us grinding a Polaris Sportsman 1000 crankshaft here at nFLOW. Give us a call at 812-402-8282 for all of your engine/transmission/turbo and machine work needs. www.nflowmotorsports.com

Attached Thumbnails