News

My clutch seems to engage very late in my opinion.
In High, it will start moving the bike around 2300RPM.

Just wondering if this is normal? Also that the low end power seems to be lacking? The front end will not come off the ground if I try?

Thanks in advance.

While I had my outlander in the garage I noticed it had an oil leak. Once I got the skid plate off I seen it was leaking where the drive shaft meets the motor. Is this just an oil seal? Also is this common because my machine inlay has 650 miles on it.

I did take a picture and will attach this below. Also is this an easy task to fix?

Attached Images

File Type: jpeg

1CBE1354-2C4F-4C0B-AF50-FD02EEE4C964_1513477982009.jpeg (1.15 MB)

Can’t find dimensions anywhere.
Can anyone provide?

Comparing to the Terra 35
13.5 L
4.5 D
4.8 H
20#

This year Polaris did a little (But very good) upgrade to the Phoenix 200, the fuel cap on the late model has no longer the vent hose.

This is a headache for me since the bike is used by my 6 year old son and he is constantly pulling that damn hose. Some times I worry about getting some dirt or water into the fuel tank so I´m constantly telling my son to assure the hose is in place.

After checking the parts list on the late model the part number of the gas tank, and of course the gas cap has changed.... I was expecting just to replace the gas cap but I see it´s going to be more complicated than that.

Anyone else has any better solution to get rid of the gas cap vent hose?

Hey i was wondering the best way to remove rear diff bearings on a sportsman 850 heat or puller?

Hey, I've been using atv forums for a year and a half now and got a ton of useful info. Don't know why it took me so long to join!

Hi guys, I would like to throw in some inexpensive LED headlight bulbs. I realize they don't project as well, so not asking how they perform. Any suggestions on bulbs? Also not sure of size yet either. Thanks!!

I'm looking at getting a new set of tires and I'm looking at the zillas in 27-10-14 and 27-12-14 Will they fit on a stock 17 850sp I just don't want to get spacers

2008 Sportsman 500

Front diff is leaking from all three seals.

I was wondering if seal kit 3234593 contains the seals for all three holes? Polaris dealer is no help and all I can find is a picture of what's in the kit: 2-1.5" seals, 1-1.25" seal, and four o-rings.

Another option would be to purchase the seals seperately but I'm unable to find part numbers online and again, no help from the dealer.

Any help would be appreciated.

2008 Sportsman 500

Front diff is leaking from all three seals.

I was wondering if seal kit 3234593 contains the seals for all three holes? Polaris dealer is no help and all I can find is a picture of what's in the kit: 2-1.5" seals, 1-1.25" seal, and four o-rings.

Another option would be to purchase the seals seperately but I'm unable to find part numbers online and again, no help from the dealer.

Any help would be appreciated.