94 Polaris 300 Won’t Crank

Hello all. I have a 94 Polaris 300 2 stroke that ran perfectly fine when I parked it about a year an a half ago. Since then I haven't had any time at all to ride it. Anyways, I tried starting it yesterday and it won't even crank. I hooked up a jump box and didn't change anything. I have headlights and everything else seems to the working. I do notice however that in the center where my "dummy" instrument lights are, that my neutral light isn't coming on. I clearly have the ATV in neutral. I know there's wires and a switch for the gearshift lever for neutral, reverse,etc. coming off of the whole gearshift assembly. I haven't looked far into it to rule out the kill switch. I am just looking for direction to go in. I am moving and need to sell the atv anyways and don't have much spare time at the moment. On another note..what would be a good asking price? All plastic is in good condition and I just rebuilt the top end. Also comes with Polaris plow.

Thanks for your time

Attached Thumbnails
Click image for larger version

Name:	IMG_0892_1506338433109.jpg
Views:	N/A
Size:	1.03 MB
ID:	88594  

94 Polaris 300 Won’t Crank

Hello all. I have a 94 Polaris 300 2 stroke that ran perfectly fine when I parked it about a year an a half ago. Since then I haven't had any time at all to ride it. Anyways, I tried starting it yesterday and it won't even crank. I hooked up a jump box and didn't change anything. I have headlights and everything else seems to the working. I do notice however that in the center where my "dummy" instrument lights are, that my neutral light isn't coming on. I clearly have the ATV in neutral. I know there's wires and a switch for the gearshift lever for neutral, reverse,etc. coming off of the whole gearshift assembly. I haven't looked far into it to rule out the kill switch. I am just looking for direction to go in. I am moving and need to sell the atv anyways and don't have much spare time at the moment. On another note..what would be a good asking price? All plastic is in good condition and I just rebuilt the top end. Also comes with Polaris plow.

Thanks for your time

Attached Thumbnails
Click image for larger version

Name:	IMG_0892_1506338433109.jpg
Views:	N/A
Size:	1.03 MB
ID:	88594  

Buggy Whips: Modded Mondays

Buggy Whips: Modded Mondays Buggy Whips: Modded Mondays
While at the UTV Invasion a few weeks ago, we spied this beautiful Maverick X3 built by Buggy Whips Inc. It features a host of products from major industry companies and as you would imagine, a couple of exceptionally nice LED whip flags. A post shared by Buggy Whip Inc. (@buggywhipinc) on Sep 6, 2017 at 4:24pm […] more

Fires and fuels no crank

I have a 2000 Polaris xplorer 400 2stroke. It was feeling bogged down so I took the air filter off and ran it down the road. It ran great. Right when I got back to my driveway it died. It's getting fire and I removed the carb and cleaned it good. It's getting gas but will not start. Just turns over. Help please.

Factory muffler for 1000 outlander.

Hey guys, I didn't see a classified section on here and if this needs to be removed please do. I am looking for a factory takeoff muffler for a outlander 1000 before we go to trailfest for my wife. If you have one you want to donate or sell cheap please let me know through PM. Thanks!

Spotlight mounting

Just got some 4" led spotlights looking to mount to front of 06 sportsman . Anyone have any ideas as what looks good without drilling into plastic or bumper? Was also wondering if anyone knew how thick the Polaris accessory metal bumper is if it would be worth drilling and tapping the bumper and bolting the lights to it?

Sent from my SM-G850W using Tapatalk

T-Map wiring harness

Hello All,

Purchased a new to me 06 sportsman 500 efi. Thought it was running well since I got it but after every trip out it would start to miss at a low rpm and run like Garbage.

I checked the throttle body area and wiggled the wires at the T-Map sensor and the machine would run like cap again and engine light come on. I also noticed the grommet was split and broken.

Instead of buying the aftermarket harness I went ahead and made my own buy using a 3 wire Grote light pigtail for the femal plugs taking it apart and adding the plugs to my factory harness. Whole set up cost me $6.50 . Crimped it on and the machine fired right up with no engine light.

Took the machine for a rip and it was breaking the back wheels loose getting on the throttle had never done that since I bought it as well as a smoother idle.

I hope this fixed the problem will keep you posted.

Sent from my SM-G850W using Tapatalk

10/6 thru 10/8 CAW night ride

Hey yall, located in upstate SC and going to carolina adventure world for the night ride October 7th and I'll be their the 6-9th

Have a could head going and would love to maybe meet some people :):)

Lmk if you want to ride, we have a camper, fires, dinner and adult beverage hahahahah