News

THE RAIN MAKE UP DAY FOR THE RAINED OUT SUNDAY IN JUNE RIDE HAS BEEN RESCHEDULED FOR 8/17 SAME START TIME.

NEW RIDERS ARE WELCOME ON THAT SATURDAY 8/17, REGISTRATION FOR THAT RIDE WILL CLOSE ON 8/9 FOR NEW REGISTRATIONS


https://trempealeaucountyatvclub.com/



Stave, Mary, Rich, Tomasz, Ben, Maybe make a long weekend out of this?????

Add a ride at BRF on Friday? or Sunday? or both Friday and Sunday???

.

Hi I have 1998 colored it ran fine up to about a week ago when I went riding it die on me and now it will not start fuel is getting from the tank to the carburetor but the plug is not wet at all and the carburetor is clean any help someone could give would be awesome

So I decided to add an after market winch to my 2018 Polaris Sportsman 450 and I want to hook it into the factory plug in that is made for a Polaris factory made winch. Because right now where I have the winch hooked up, it is constantly running power and drains the battery even when the atv is off. Is there any kind of adapter or anything that will allow me to do this? Thanks!

What am I missing here. Motor mount replaced. Took primary to dealer had them go through it and replaced one way bearing, got secondary shims, belt looks centered still no luck. What am I missing here. I'm going crazy. This is on 08 800ho

First time ATV owner, just inherited a 2006 Hawkeye. The key was lost so I bought a new ignition switch, I was also told it needed a battery and now that is brand new. I turn the key nothing on dash lights up, I hear no clicking, battery is fully charged, key is on, it is in run position and in neutral. I have only had it for a couple of days now and don't know too much about ATV's. Any suggestions where to start trouble shooting?

Was wondering how many guys use there tiger tails compared to there winch? All the guys I ride with have both and we use the tiger tail about 95 percent of the time to pull stuck machines out. I wouldn’t ride with out one they are very useful and easy to use.

Attached Thumbnails

 

Hey guys. I’ve got a 14 sportsman 570. I know that it got wet fuel in it because after i poured the gas in it and started having trouble, I found that my gas can that i used had a crack in it and had gotten rain water in it. once it started missing and I realized what I had done I drained the tank (multiple times) ran treatment through it, and changed the spark plug. The bike is still missing, backfiring, and doesn’t idle well. It will however run better once it gets opened up and running faster. I’m thinking either fuel pump or injector but was hoping someone on here would give me some input. I know that’s a hell of a first post but thanks for any response in advance!

I'm having to repair a torn front CV boot this week on my 1996 Sportsman 500 so I'll need to remove the front hub and strut to get to the boot.

I know the wheel bearings don't use any grease since they are lubricated by the oil in the hub. What I'm not sure about are the two strut bearings. The manual does not mention anything about greasing the inner and outer strut bearing but places online said that the strut bearings need to be packed with grease.

So, my question is which is it? Do I need to grease the inner and outer strut bearings or not or are they lubricated by the oil in the hub? The only time the manual mentions any lubrication is when it says to fill the hub with the appropriate fluid.

Also, do I need to grease the Hillard clutch or is that provided by the oil in the hub?