Hello everyone! I’m am new to the atv world! I have a 2018 outty 570 dps. I’m curious if anyone has a check list of things they like to go through after a ride to assure it’s ready for the next trip! After each ride I already power wash my machine and lube/grease all the suspension parts. Anything else I should pay attention to?
Insallation Snorkel kit
Wondering how hard it is to install brp snorkel kit on a 19 outlander max xt & does it interfere with hand protector. Any info appreciated.
Need ideas to plan a fall atv trip
So some buddies and I were thinking we'd plan a 3 or 4 day atv trip this fall and rent a cottage that's atv friendly but I'm not really sure where to go (maybe Muskoka)
What we'd like
-Accommodations for 3-5 guys
-Close access to trails
-Within two hours North of Toronto
-No guided or beginner tours
-long trail system
If anybody has planned a trip like this in that area any advice on where to stay and ride would be helpful.
What we'd like
-Accommodations for 3-5 guys
-Close access to trails
-Within two hours North of Toronto
-No guided or beginner tours
-long trail system
If anybody has planned a trip like this in that area any advice on where to stay and ride would be helpful.
Got my ECU from Wholesale atv
Hey guys,
I’m gonna post on the Renegade section as well but wanted to give an up date to my ECU sent to Wholesale atv for reflash. I just installed the ecu today and took it for a spin around the neighborhood. All I can say is F***in AWESOME!!!!!! All a had Ray at Wholesale do is adjust fuel for Yoshi slip on and adjust timing. All limiters are left stock. This bike rips! In low to mid rpm! NO more burbbles and pops of idle, so smooth! Pulls really hard off the bottom. I haven’t had a chance to take it to full top end rpm but I don’t have a doubt it will be just a great. Also haven’t ridden it long enough for the temp to get high enough though, it’s quite chilly here in Vegas for this time of the year. Can’t wait to take it out and see if the bike runs a bit cooler. To all of you who are second guessing this company, you should not worry one bit. Super great customer service, fast turn around time, and awesome performance. Ray is the “man”!
I’m pretty sure you could get the same results from another top name company but nobody can touch their pricing! $100 bones!!!!!!!
Thank you Ray at (Wholesale Atv) My bike feels like a beast! As it should!
FYI- notice the purple exhaust pipe? That’s from the lean condition BEFORE I had the fuel adjusted.
I’m gonna post on the Renegade section as well but wanted to give an up date to my ECU sent to Wholesale atv for reflash. I just installed the ecu today and took it for a spin around the neighborhood. All I can say is F***in AWESOME!!!!!! All a had Ray at Wholesale do is adjust fuel for Yoshi slip on and adjust timing. All limiters are left stock. This bike rips! In low to mid rpm! NO more burbbles and pops of idle, so smooth! Pulls really hard off the bottom. I haven’t had a chance to take it to full top end rpm but I don’t have a doubt it will be just a great. Also haven’t ridden it long enough for the temp to get high enough though, it’s quite chilly here in Vegas for this time of the year. Can’t wait to take it out and see if the bike runs a bit cooler. To all of you who are second guessing this company, you should not worry one bit. Super great customer service, fast turn around time, and awesome performance. Ray is the “man”!
I’m pretty sure you could get the same results from another top name company but nobody can touch their pricing! $100 bones!!!!!!!
Thank you Ray at (Wholesale Atv) My bike feels like a beast! As it should!
FYI- notice the purple exhaust pipe? That’s from the lean condition BEFORE I had the fuel adjusted.
2019 John Penton GNCC ATV Highlights
Pros and cons of 2019 sway bar
I'm looking at buying a new 2019 650 XT, which have the new front sway bar, and I'm wondering if it is an advantage for all driving styles or only high speed cornering. Most of my riding is lower speed and climbing/descending steep inclines and I'm thinking that the sway bar could reduce traction by lifting the opposite wheel if one wheel climbs a rock during a climb. Ideally, the sway bar would be dis-connected at low speed and engage only for higher speeds, but I don't think it is designed that way. Thoughts?
Thanks,
Dave
Thanks,
Dave
India proposes electrifying motorbikes, scooters in 6-8 years
Filed under: Green,Emissions,Motorcycle,Electric
India is one of the world's biggest two-wheeler markets, with more than 21 million sold in Q1 2019.Continue reading India proposes electrifying motorbikes, scooters in 6-8 years
India proposes electrifying motorbikes, scooters in 6-8 years originally appeared on Autoblog on Wed, 22 May 2019 15:50:00 EDT. Please see our terms for use of feeds.
Permalink | Email this | Comments2012 XMR compressor access
Just got my first XMR so I apologize if this is a stupid question....where can I access the ACS compressor to connect an air hose? I've looked online and the only pics/video I can find are for years other than 2012 and what's under their seat does not look like what's under my seat. Any insight is appreciated.
Hi from iceland
Hi.. i have outty 800cc 2007.. that i am trying to rebuild. Trade it for cf moto.. it has been 3 months of rebuilding... have all together now exept the speedometer.. he is not easy to find.. but one day i will find one😁
Gas Gauge Cloudy
Hello all,
I tried a search but had no luck. I have a 2005 Outlander Max XT and the gas gauge has gone cloudy to the point where it can't be read. It happened before but would clear itself when I was riding. Not any more. I had a good run a few days ago but the gauge remained cloudy. Any suggestions, comments past experiences would be welcome.
I tried a search but had no luck. I have a 2005 Outlander Max XT and the gas gauge has gone cloudy to the point where it can't be read. It happened before but would clear itself when I was riding. Not any more. I had a good run a few days ago but the gauge remained cloudy. Any suggestions, comments past experiences would be welcome.