polaris 335 camshaft
can anyone help I need a camshaft for a 335 sportsman 1999
Don’t Miss These Deals from Rocky Mountain ATV-MC
Why You Should Add an Aftermarket Exhaust by HMF Engineering
Why You Should Add an Aftermarket Exhaust by HMF EngineeringHMF Engineering was founded in 1997 building private label motorcycle performance motorcycle exhausts, and since then they have been at full sound producing exhausts for many different markets, including the ATV and side-by-side categories. In addition to exhausts, HMF makes aftermarket bumpers, intrusion bars, racks, clutch kits, and other assorted accessories under their IQ division. […] more
2003 Scrambler 500 4×4 – Rear Shock Help
Hello all,
Trying to replace seals and O-rings on my Fox 1.5" ATV Series rear shock and cannot find any info on how much oil or even the process on how to fill it, etc. I have a local shop that can do the nitrogen, but wanted to save $200 and do the seals myself. Any good resources or advice would be truly appreciated!!
Thanks in advanced!
Daniel
Trying to replace seals and O-rings on my Fox 1.5" ATV Series rear shock and cannot find any info on how much oil or even the process on how to fill it, etc. I have a local shop that can do the nitrogen, but wanted to save $200 and do the seals myself. Any good resources or advice would be truly appreciated!!
Thanks in advanced!
Daniel
2003 Scrambler 500 4×4 – Rear Shock Help
Hello all,
Trying to replace seals and O-rings on my Fox 1.5" ATV Series rear shock and cannot find any info on how much oil or even the process on how to fill it, etc. I have a local shop that can do the nitrogen, but wanted to save $200 and do the seals myself. Any good resources or advice would be truly appreciated!!
Thanks in advanced!
Daniel
Trying to replace seals and O-rings on my Fox 1.5" ATV Series rear shock and cannot find any info on how much oil or even the process on how to fill it, etc. I have a local shop that can do the nitrogen, but wanted to save $200 and do the seals myself. Any good resources or advice would be truly appreciated!!
Thanks in advanced!
Daniel
Polaris trail boss idle issues
Cleaned carb put new rebuild kit if i let off throttle it cuts off.cant get it to stay idled the way it was set when i bought it
Hi group
Thanks for add
96 trailblazer 250 hellllppp!
i have a 96 trailblazer 250 , brand new topend from ritter cycle has spark has fuel has compression, so it should run right?!..wrong... well all i get is the occasional backfire it will not start at all, the crank seals are good, im running oil injector, also running premix 93 octane and klotz 2 stroke oil. also the timing is dead on
i have checked everything over and over again and all is showing good spark is strong,
what can it be that im missing please help
i have checked everything over and over again and all is showing good spark is strong,
what can it be that im missing please help
98 Sportsman 500 reverse grinding
Hey all, new to the posting on the forums here, learnt tons about the quad using this page as a reference.
So ive got a 1998 Sportsman 500 4x4 that ive been having some issues with lately. When shifting into reverse the problem has slowly gotten worse. Initially when shifting into reverse sometimes the gears wouldnt mesh and it would grind, so id pop it back into neautral and keep trying until it would lock into gear.
That was last year.
Now my issue is when i shift into reverse and give some gas, theres an ABSOLUTELY HORRENDOUS grinding that come from it, however the reverse will still work. quad will back up no issues, it just sounds like absolute death
Any one ever had an issue like this before? just want to get an idea of what might be happening before i rip the transmission apart and cant use the quad for the season. been looking at just picking up a new trans, but if its a fairly easy fix id rather just go that way
I appreciate everyones input, and thanks for the learnin's!
So ive got a 1998 Sportsman 500 4x4 that ive been having some issues with lately. When shifting into reverse the problem has slowly gotten worse. Initially when shifting into reverse sometimes the gears wouldnt mesh and it would grind, so id pop it back into neautral and keep trying until it would lock into gear.
That was last year.
Now my issue is when i shift into reverse and give some gas, theres an ABSOLUTELY HORRENDOUS grinding that come from it, however the reverse will still work. quad will back up no issues, it just sounds like absolute death
Any one ever had an issue like this before? just want to get an idea of what might be happening before i rip the transmission apart and cant use the quad for the season. been looking at just picking up a new trans, but if its a fairly easy fix id rather just go that way
I appreciate everyones input, and thanks for the learnin's!