News

should the fan on my 2000 scrambler 500 be on all of the time? Or does it come on after it gets hot?

should the fan on my 2000 scrambler 500 be on all of the time? Or does it come on after it gets hot?

2000 scrambler 500 should the fan be on all of the time? or does it kick on after it gets hot?

Have a 2014 6x6 Big Boss and really want a front tow bar, so I can easily reverse my boat trailer to the sea (have several curves down to the water, and no possibility to turn around)

Haven't found original parts, but I am sure somebody have done this ;-)

But how?
Have a 2500 lbs winch installed, and need to keep it (would believe that the mounting points to this will be strong enough) but as mentioned, I need this also....

Any tips, hints etc....?

Sent from my SM-G955F using Tapatalk

Bought a non-running 96 xplorer 300. Had the head sleeved back to stock size, new wsm piston, rings, and gaskets. Put it together and started it. Erratic idle, bogging under throttle, and backfire when letting off the throttle. Then i changed crank seals, same thing, rebuilt the carb, same thing. Took the plug out of exhaust and a bunch of black pebbles came out, still runs the same with the plug out and I'm out 3 of ideas. Any suggestions. Thanks.

So the other day I was using the winch and plow on the 4 Wheeler. It's started to overheat out of nowhere which turns out to be a radiator leak that I will do with at another time.

I want to go started after it cooled off, and it will not start.


Thought it was battery swapped out battery not the battery.


The Relay is fine. Power to it, 12 volts , hear it working, all that jazz.

Power to the starter, 12 volts. Checked the solenoid wire...like 20 miliamps.

No secondary solenoid switch whatsoever.

Cleaned all connections.

What is the deal?

Whelp,,,I can’t find a thing on-line no MATTER how I word it,& nothing here,,it’s covered im sure,,somewhere. How do you get the play out of your thumb throttle? My dealer did it once but it’s since gotten a little loose again. You do it from up @ the handlebars or do you have to adjust something down by the throttle bodie? Thanks for the help,,much appreciated.:smile

If the weather settles down the plow will get some work today. My office actually closed this morning for this spring storm. Getting occasional snow rates of 2" per hour, and winds topping 80+ mph. So far the power hasn't gone out, but expecting it to do so any time. Should be fun if things calm down a little.

I've searched and haven't found anything. My kid (11) recently got into four wheelers (his buddy has one) and I came across a 400 Sport for a great deal. This thing is great and has a ton of top end power...too much power for him while he is still learning to ride.

Are there any ways to reduce the power or limit the rpm range?

Thanks in advance.