2019 outlander max xt 850, 35miles on it now and when I checked the oil yesterday it was a little under the hash marks. Dealer says I dnt want it full due to high compression and will cause seal leaks. With any other engine I have maintenanced, the oil should always be within operating range! Comments appreciated!
07 Sportman 800 X2 electrical problem
I just purchased this quad a few days ago and I knew that it hadn't run in a few months but when I got juice to the battery terminals the pod lights up, headlights work and tail lights, rear work lights and that's it. There is no sound of a "click" when the key is turned over or anything. Vehicle was in Park and the brake handle was applied but nothing. Any ideas on where to start my search for the culprit? I'm new to owning a four wheeler and really have no clue where to start. I found the fuse block under the front "hood" piece and all fuses were good to go. I also saw some block relays and wonder if they could be the culprit as well. Any input would be greatly appreciated!! :grin
2012 sportsman 500 Ho no fire
Got a new battery and ran fine for a few days. Lost my key so I had to start at starter solenoid next to battery with a screwdriver. Would that kill my cdi box? Atv will turn over now but not getting any spark. Recently installed new ignition switch but still nothing. Think it may just be a bad spark plug or I need a new CDI box? Any help tips or suggestions greatly appreciated. Thanks
Mud Tire Advice
I Just bought a new 2018 Sportsman 570 SP touring and it has stock 26x8-14 F / 26x10-14's R mounted. Choices are insanely limited on what is made is this odd size. I'd like to go with a set of Maxxis Zillas in a 26x9-14 / 26x11-14. Do I need to also purchase 1" spacers to clear anything? Thanks for any input. Also, if there are any other mud tires recommended with as close to a 1&1/4" or deeper lug, that won't break the bank, I'd love to know what they are.
330 Outlander front shocks
Blew a front shock and am looking to replace both front. Anyone have any suggestions on where I can find a set a little less expensive that the factory set. Not having any luck. Any suggestions would be a appreciated
Help with tire size! XMR Tires on an XT
If anyone can please help. I just bought a 2019 Defender HD10 XT and want to put the same tires on that are on the XMR Defender. I want to put ITP Cryptid 30x9x14 and 30x11x14. Will these tires fit on my stock XT rims and will there be any rubbing issues on the machine? Do I need to lift it? I appreciate any info. Thanks!!
Help with tire size! XMR Tires on an XT
If anyone can please help. I just bought a 2019 Defender HD10 XT and want to put the same tires on that are on the XMR Defender. I want to put ITP Cryptid 30x9x14 and 30x11x14. Will these tires fit on my stock XT rims and will there be any rubbing issues on the machine? Do I need to lift it? I appreciate any info. Thanks!!
Big Gun full exhaust 01-03(more??) 500HO – Never installed
I have a Big Gun (12-P50M) full Exhaust that has never been used. At the time of purchase, this was listed for years 01-03, however, it appears that it likely will work on later models - potentially up to 13 - but I'm not sure.
$200 obo
Paul
$200 obo
Paul
2008 Polaris Trailblazer no start/run
I have a 2008 Polaris Trailblazer 330 that has been flawless since purchased new. My grandson was riding it about 10mph and gave it some throttle and it made a bang that sounded like a gunshot. I looked over the machine and cannot see any damage.
Motor is not seized, I can use the pull rope. The only electrical thing that works is the overtemp light and it stays on with key on/off. Engine will not crank over with start button, no head/tail light etc. Battery is full charge. With key on, I try to rope pull start and it does nothing. I have to unhook battery to get the over temp light to go dark.
I have checked start solenoid and it checks out.
There looks to be 3 things it could be. CDI Assy(3088209), Controller Module(4011831), or the RPM Limiter(4011856). I downloaded the service manual and about to see if I can troubleshoot each one to hopefully find problem. Want to make sure as each of these parts are ridiculously expensive.
Has anyone had similar issue of nothing working(except over temp light) after what appears to be a backfire?
Motor is not seized, I can use the pull rope. The only electrical thing that works is the overtemp light and it stays on with key on/off. Engine will not crank over with start button, no head/tail light etc. Battery is full charge. With key on, I try to rope pull start and it does nothing. I have to unhook battery to get the over temp light to go dark.
I have checked start solenoid and it checks out.
There looks to be 3 things it could be. CDI Assy(3088209), Controller Module(4011831), or the RPM Limiter(4011856). I downloaded the service manual and about to see if I can troubleshoot each one to hopefully find problem. Want to make sure as each of these parts are ridiculously expensive.
Has anyone had similar issue of nothing working(except over temp light) after what appears to be a backfire?
reverse
when i put the bike in reverse it will stall but if i hold the override button down before i shift into reverse it works fine, why is it doing this....