I’m in a big mess I submerged my can am renegade 1000 xmr and I drained everything pulled the plugs hand cranked the motor so I know it’s not locked the starter cranks over but it’s weak I tried charging the battery and it’s still the same and it hasn’t ran since it was submerged please help
Starting issue
I’m in a big mess I submerged my can am renegade 1000 xmr and I drained everything pulled the plugs hand cranked the motor so I know it’s not locked the starter cranks over but it’s weak I tried charging the battery and it’s still the same and it hasn’t ran since it was submerged please help
Starting issues
I’m in a big mess I submerged my can am renegade 1000 xmr and I drained everything pulled the plugs hand cranked the motor so I know it’s not locked the starter cranks over but it’s weak I tried charging the battery and it’s still the same and it hasn’t ran since it was submerged please help
Engine light when pulling trailer
I pull a small trailer to help fix potholes in the road leading to the house. After 3 or 4 minuets the engine light comes on. After the trailer is off the light goes out. During the time the light is on, there is no difference in operation of the ATV. Called the dealer. Dealer says don't worry about it. That they will check the code on my next visit. Anyone here have any ideas?
Engine light when pulling trailer
I pull a small trailer to help fix potholes in the road leading to the house. After 3 or 4 minuets the engine light comes on. After the trailer is off the light goes out. During the time the light is on, there is no difference in operation of the ATV. Called the dealer. Dealer says don't worry about it. That they will check the code on my next visit. Anyone here have any ideas?
Partzilla Shipping Secrets When You Want Your OEM Parts Right Now
Partzilla Shipping Secrets When You Want Your OEM Parts Right NowIn today’s fast paced, frenzied world of online shopping, people want what they want, and they want it yesterday, if not sooner. Amazon helped usher in the luxury of near-same day shipping and delivery and consumers looking to order OEM parts online are reasonably expecting similar speed and service for everything they buy. We are […] more
Starting the engine first time in a year
'11 Grizz 700 here. Since I've got some warm weather these next couple days I've decided to start the bike after about a year of just sitting. Took out the plug and sprayed a good amount of fogging oil on top of the piston to help lubricate things. After about a minute of letting it soak I stuck my air line tubing in to suck out the excess, but it seems like I didn't get nearly as much in return. Repositioned the tube enough so that everything that was gonna come out pretty much did. I'll probably shoot some compressed air down the plug hole before doing the start just to make sure it's all out, as well as cranking it for a second before putting the plug back in.
How long would it take for a bit of standing fogging oil to seep past the piston rings, and where would it go? I guess into the engine oil? The oil was fairly new the last time it was started but I'm sure it could stand to be changed after sitting for so long. If much of this fogging oil got into the engine oil should I do the change before the startup?
How long would it take for a bit of standing fogging oil to seep past the piston rings, and where would it go? I guess into the engine oil? The oil was fairly new the last time it was started but I'm sure it could stand to be changed after sitting for so long. If much of this fogging oil got into the engine oil should I do the change before the startup?
Starting the engine first time in a year
'11 Grizz 700 here. Since I've got some warm weather these next couple days I've decided to start the bike after about a year of just sitting. Took out the plug and sprayed a good amount of fogging oil on top of the piston to help lubricate things. After about a minute of letting it soak I stuck my air line tubing in to suck out the excess, but it seems like I didn't get nearly as much in return. Repositioned the tube enough so that everything that was gonna come out pretty much did. I'll probably shoot some compressed air down the plug hole before doing the start just to make sure it's all out, as well as cranking it for a second before putting the plug back in.
How long would it take for a bit of standing fogging oil to seep past the piston rings, and where would it go? I guess into the engine oil? The oil was fairly new the last time it was started but I'm sure it could stand to be changed after sitting for so long. If much of this fogging oil got into the engine oil should I do the change before the startup?
How long would it take for a bit of standing fogging oil to seep past the piston rings, and where would it go? I guess into the engine oil? The oil was fairly new the last time it was started but I'm sure it could stand to be changed after sitting for so long. If much of this fogging oil got into the engine oil should I do the change before the startup?
Polaris Ground Cable Lenght
Does anyone know if the Polaris Sportsman 450 and the 570 share the same ground cable wire specifically is one longer than the other?
I installed the Battery Relocation kit from Quad Logic and the ground wire is about 2" short from allowing me to mount the Terminal Block to the frame.
I have a 2017 450ho.
I installed the Battery Relocation kit from Quad Logic and the ground wire is about 2" short from allowing me to mount the Terminal Block to the frame.
I have a 2017 450ho.
Headlight wire repair advice please
Hey guys,
The high beam (pod) light on my 2008 Sportsman 700 X2 hasn't been working. I broke out the multimeter and started checking the wiring harness. No volts at the socket with key on and switch set to HI. Pulled the wiring harness plug from the switch. Checked continuity from YELLOW pin to the YELLOW pin on the socket. No good. Broken somewhere. I looked where the BROWN and YELLOW wires come out of the big wrapped bundle and sure enough, the YELLOW wire was broken right there. See the attached picture.
So, my question is "what's the best repair" for this kind of thing? I'm new to vehicle wiring. Done plenty of wiring and soldering with my RC plane hobby. Wondering if it's best to solder this dude back together or get a small crimp-on connector of some sort.
What would you guys do?
Thanks!
Andy
The high beam (pod) light on my 2008 Sportsman 700 X2 hasn't been working. I broke out the multimeter and started checking the wiring harness. No volts at the socket with key on and switch set to HI. Pulled the wiring harness plug from the switch. Checked continuity from YELLOW pin to the YELLOW pin on the socket. No good. Broken somewhere. I looked where the BROWN and YELLOW wires come out of the big wrapped bundle and sure enough, the YELLOW wire was broken right there. See the attached picture.
So, my question is "what's the best repair" for this kind of thing? I'm new to vehicle wiring. Done plenty of wiring and soldering with my RC plane hobby. Wondering if it's best to solder this dude back together or get a small crimp-on connector of some sort.
What would you guys do?
Thanks!
Andy