Just bought a 2012 800 outlander with override button mashed will haul tail in reverse but just does take off in forward tops out at 35 in park will hit rev limiter at over 8200 but engine light is on an flashes air fault on the screen any ideas or suggestions
Best Replacement Battery to use with Winch
Going to get a new battery so I thought I’d upgrade because I now have a Winch too. Any ideas. Thanks
oil dip stick broken off
Long story ! Oil dip stick , 1 1/2" anyway broke off inside engine . Have tried flushing. Leave it their ? Take the engine apart ? 2012 850 2up.
850 w/ ADC..stripped vavle. Thoughts?
Hello Polaris forums, I am new here :)
I have 2014 Polaris Sportsman 850 EPS w/ ADC. Last week I went to drain/fill (change) the ADC fluid and I accidently torqued the right valve too much (since there are two valves on the front differential case). Anyway, I noticed that it started to turn more as I tightened it and boom, it was stripped. So I rode it a few times and it turned out that it is leaking. My only options now are to try some of that pipe tape that is used to prevent leaks in pipes, re-drill the hole or (my most disliked option) is to buy a new case. I am somewhat lost on what to do. I have known for a while that Polaris is easy to strip out as I have ruined many drain plug heads in the past from my own ignorance. Yet, this time, I am unsure if even drilling out the hole would result in a bad case and having to take apart the entire thing to stop metal shards from getting in.
Any suggestions would be appreciated! Thank you
- Andrew
I have 2014 Polaris Sportsman 850 EPS w/ ADC. Last week I went to drain/fill (change) the ADC fluid and I accidently torqued the right valve too much (since there are two valves on the front differential case). Anyway, I noticed that it started to turn more as I tightened it and boom, it was stripped. So I rode it a few times and it turned out that it is leaking. My only options now are to try some of that pipe tape that is used to prevent leaks in pipes, re-drill the hole or (my most disliked option) is to buy a new case. I am somewhat lost on what to do. I have known for a while that Polaris is easy to strip out as I have ruined many drain plug heads in the past from my own ignorance. Yet, this time, I am unsure if even drilling out the hole would result in a bad case and having to take apart the entire thing to stop metal shards from getting in.
Any suggestions would be appreciated! Thank you
- Andrew
Scrammy Got Neglected This Christmas
So last year the Scrammy was treated well for Christmas. This year the Scrammy didn’t make the cut for Santa’s list.
What say you guys? Anyone get any Cool Guy toys?
What say you guys? Anyone get any Cool Guy toys?
Rally 175 help
Good morning and merry Christmas!! I'm new to the forum and joined in hopes that some one out there would know where I can find a piston for the rally 175 I have been searching for months with no luck. I would even settle for a junk one I could send in to wiseco or je to have a custom one replicated.
Rally 175 help
Good morning and merry Christmas!! I'm new to the forum and joined in hopes that some one out there would know where I can find a piston for the rally 175 I have been searching for months with no luck. I would even settle for a junk one I could send in to wiseco or je to have a custom one replicated.
2012 can am 800 outlander
My 800 has been sitting for over a year it runs but has no power an won't get over 35 mph an flashes an air fault code
2012 can am 800 outlander
My 800 has been sitting for over a year it runs but has no power an won't get over 35 mph an flashes an air fault code
Rjwc slip on vs full kit
So the wife bought me the rjwc split dual slip on for Christmas instead of the full kit by mistake. Still happy tho
Is it worth the extra cash to get the headers too? I'm not going crazy with mods or power.
Seeing as it's not a true dual even with the full kit, what's your opinions?
Sent from my SM-N960U using Tapatalk
Is it worth the extra cash to get the headers too? I'm not going crazy with mods or power.
Seeing as it's not a true dual even with the full kit, what's your opinions?
Sent from my SM-N960U using Tapatalk

