Posted on

2008 400 efi xt – primary puller

on my 2008 400, the bolt holding the primary on is left hand thread. i presume that the puller tool uses the same threads and is also left hand. are all models left hand? i want to get some one way bearings and UATV-tech has a kit w/ the belt removal bolt (i know, it's just an 8mm, but find just ONE for under the $5 price of the actual 'tool' is difficult), back sheave puller, grease and the bearings. but i can't determine if the primary back sheave puller is universal and will work w/ mine. i don't plan on removing the back sheave when i do the bearings, but i think the kit will be cheaper than getting everything individually. and some day, i might need to remove it.



thanks.
Posted on

2015 570 non EPS compression check

Plan on inspecting a used 570 today that has 1200 miles / 122 hours.

Anyone have an idea of what I should expect when doing a compression check?

Seems 130 psi is the desired norm based on several other models in the 500cc range, but being used I don't expect it to be quite that high.

Is there a range that will help me make a decision as to whether or not the reading I get seems relatable to the miles and hours put on the machine?

For example is 100 psi way too low, yet 120 could be expected and should indicate that the top end is still in pretty good condition?

Thanks for any input
Posted on

Hello from the arctic

I have an outlander 2013 model max 500 and i like it a lot, I’ve hunt with it quite a lot and ride it around. But I have been having hard time with it now. Has no more lights and no more handle bars warmer and the engine light is on but sometimes when I play with the wires it doesn’t do that anymore but goes back. What do I have to change? Wire harness? And which web is the best to shop?
Posted on

Polaris Sportsman LE 550 2013

Hi, I am Kathleen and I am 69 living life large in Wasilla, Alaska. I just replaced my battery, and when connecting the terminal wires, the blower, assuming fan, comes on. The machine is off. No key in ignition. Can anyone help me with this issue? Thanks in advance. Blessings!
Posted on

Fox podiums!

Picked them up from the powder coating guy! About 2” more clearance. Will have to play with preloads.

Before


Sent from my iPhone using Tapatalk
Posted on

Exhaust manifold bolts

My exhaust manifold bolts keep coming loose.
They are not oem bolts but they are the correct size.
Can I use some blue loc tight or should I just order some oem bolts?
Posted on

Front Pinion Cover

Just picked up a 2018 Scrambler a few weeks ago, awesome machine.

I've been reading that the front pinion cover is the must upgrade, since the stock one is weak and can break. I have also read that they upgraded the cover starting this year with the 2018's that apparently addresses this issue.

What do you guys recommend? Should I be safe or should I still swap it with an aftermarket, such as the cecco racing one.