So im having a problem and havent been able to figure it out. My sportsman 500 efi will run fine for a few hours of normal riding. Then when i let off the throttle it will cut off. It will start right back up if i hold the throttle down but as soon as you let off it will cut off again. If you wait about 30 min or so it will run fine again and basically repeat. Has anyone had this issue or know what my problem could be? Thanks in advance.
High temp warning
Went for a ride in the mountains yesterday. Great time in the woods! Got the high temp warning twice. It was hot outside but this has never happened. Radiator looks clean and I don’t ride in deep mud ever. The fan was working. Anyone have a starting point for me to fix this? 2013 Outlander XT max 800r. 430hrs 2700 miles
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
One-way washer question .
Hey folks , this little washer has a raised portion on one side .
Which way is it supposed to go ?
Toward the motor or outer clutch sheave ?
Which way is it supposed to go ?
Toward the motor or outer clutch sheave ?
QSC Clutch got hot
I got my qsc clutch quite hot on my 2014 outlander 1000. After the quad cooled down I went to go ride again to find I could only get it into gear by revving it up or else she'd stall. I assumed one way bearing seized but it doesn't seem to be the case. The primary will not return to idling position, it stays about 1/2 inch in from fully out. I tried to pull the clutch off but was only able to get the clutch pulled back to where it sits idling, and only achieved this by using ratchet straps to pull it that far out. Any ideas as to whats going on?
Hello
New here...just picked up a used 2014 sportsman 570 pursuit.
Love it so far!
Gotta take it in for the fuel vent recall and side heat bulletin.
Already shopping for rear cargo seat...and pretty set on the kimpex nomad 458000.
😊😊😊😊😊
Love it so far!
Gotta take it in for the fuel vent recall and side heat bulletin.
Already shopping for rear cargo seat...and pretty set on the kimpex nomad 458000.
😊😊😊😊😊
So hot it is melting!
Good Morning! I have a 15 Outlander 1000. It is getting so hot under the seat that its melting the plastic. Radiator is clear, no temp lights are coming on. Any ideas? Thanks!
Good Morning!
Hi my name is Mike and I have a 2015 Outlander XMR 1000. I am happy to be a part of this group and look forward to learning!
1996 polaris magnum 425
I have a 96 magnum 425 that I bought 2 years ago. I have done a ton of research on this atv and found out how to make it a 518 and plan on doing this when I can afford to do it. I have gotten the cam and carb already however I would like to know if there is a beter carb to put in it like a slide carb and if it is actually worth doing such. If anybody has any experience in doing this your help would be greatly appreciated
G2 Outlander 650 XT
I’ve done a few upgrades to my 2016 outlander XT 650. Installed the can am snorkel kit, can am rad relocate, made some spring spacers for the shocks, installed a dalton clutch kit with secondary spring, and last I got some 28x10x12 gorilla silver backs!
Now I’m ready to hit the mud again!
Now I’m ready to hit the mud again!
Windshield and hand warmers
Just purchased a 2018 xmr 1000 atv. I wanted to put a windshield on this bike along with hanwarmers for this winter. The brp fitment guide says the windshields will not go on the xmrs? I was originally thinking it’s because the bike comes standard with hand wind guards so they just say you can’t put a windshield on. Now I’m not so sure, maybe it’s because of the radiator? Has anyone put a windshield on a 2018 Can Am outlander xmr 1000?