Round five of the 2018 ATV Motocross National Championship (ATVMX), an AMA National Championship, hit High Point Raceway head on as predictions of rainfall were forecasted throughout the week leading up to this past weekends event.
Im Looking for used atv for my daughter to ride next year. I heard its not a polaris engine.. is that true?
1.How is the reliablity of the 300 engines? how many hours/miles is it capable of ? (I would prefer a 400 but they are harder to find. )
2. power wise how are they?how would it compare to a trail boss 330?
3. anything else I should be aware of with these?
thanks
Any thoughts on how to get wheel hubs apart? the inner and outer hub is stuck on the wheel bearing, I have trade hammering, heating soaking in pb blaster, any more tips or tricks? I have seen them in pieces and am trying to just replace a bunch of parts before possibly selling the machine, so I do not want to break the hubs.....
Also having an issue getting the screws off the pinion cover as they take a tiny little 4mm allen head that I have already broken one off, Going to try heat next to break the locktite...
Need some help . I've been reading lots of forums and can't find the problem with my quad . I took it out for an hour or two ride the other week hit a few good bumps was working great . After hitting a driveway I slowly lost power then the quad shut off hasn't started since . The engine turns I have spark fuel and compression I've cleaned out my carb and checked to make sure my timing was good .
Thanks for the help in advance .
2013 850 idles high at start up usually up to 1850 -1900 . Takes along time for atv to idle down . Some times I need to start and shut off atv a few times . Other times it will idle back to normal if you play with the throttle. When riding and you come to a stop it takes a while for atv to come down off idle and stays moving forward until it does . I’m thinking it could be the tps sensor . How do I fix / adjust/ clean this sensor . Any tips . Thanks in advance .
Hi, Anyone know the front brake disc dimensions (especially the thickness) on a 2003 polaris predator 500? I want to convert the brake system on a very old JD AMT 600 from cable pull to hydraulic and can get the complete system from a wrecked predator so am trying to verify the replacement caliper will fit over the JD rotors and be large enough. Thanks for any help.
Hello all, I purchased a 2018 570 Sportsman Utility Edition in Ghost Gray in March. It runs great and I love riding it. The idle cadence bounces around/sounds rough. It doesn’t die. My folks have a RZR 570 that is a few years old. Theirs does not idle like mine does, although the idle rpms are the same. Any ideas on what might be the cause? We are about 90 minutes from the nearest dealer/service. Thanks for the help! I’m a newbie! 😊
Hello all, I purchased a 2018 570 Sportsman Utility Edition in Ghost Gray in March. It runs great and I love riding it. The idle cadence bounces around/sounds rough. It doesn’t die. My folks have a RZR 570 that is a few years old. Theirs does not idle like mine does, although the idle rpms are the same. Any ideas on what might be the cause? We are about 90 minutes from the nearest dealer/service. Thanks for the help! I’m a newbie! 😊
I want to get a plow for my 2015 850, which brand is good? I want a sturdy plow set up that can take a beating.
I had the Polaris glacier on my old 500 that kept bending every time I used it, the next atv I got the Warn provantage and it held up great. Is the new Polaris Glacier integrated plow any good? Or should I stick with Warn or is there a better set up out?
I just joined the Can-am Family ! Traded in my 05 Suzuki Vinson for a 2017 Outlander Max X-mr 1000 , wow what an upgrade .
