Blackwater racing wheel bearings?

I ordered rear wheel bearings from Ebay and the brand said blackwater racing. When I got them they said made in China What do you guys think of getting bearings that are made in China? My upper and lower A arm bushings are worn and noticed some play in the wheel bearings. This is the rear wheel bearings on a 1999 sportsman 500. I'm also replacing the rear shock mounts and sway bar bushings.

Choke cable stuck

Been trying to get the carburetor off my 95 trail boss to rebuild it but I can't get the choke cable out of it. Been soaking with penetration oil for two days. Is there another trick I'm missing or is it that froze up. Any thoughts?

2010 Sportsman 90 front wheels tow out bad

I have a sportsman 90 that the front wheels toe out bad on it and was wondering if there is an easy fix that I can't see the shocks are all the way up on it and the bushings look good. Not sure what else to do.


Sent from my iPhone using Tapatalk

Engine Oil turned to Sludge

See pic below of an engine we received at our nFLOW reman facility recently. Contact us for all of your engine/transmission/turbo reman needs. We will get it back to looking and running like new. www.nflow.com

Attached Thumbnails
Click image for larger version

Name:	Engine Oil Sludge.jpg
Views:	N/A
Size:	100.0 KB
ID:	85249  

Portal boxes

Anybody have portals on their high lifters? I would like a set and run some 33 inch bkt tractor tires. Even with the stock tires my 850hl looks like it needs a lift, I like a little more fender clearance.

xmr 1000r front shock adjustment

Hi I have a 2014 Can Am XMR 1000r I have a issue with adjusting the front shocks through the digital controls on the dash. I can easily adjust the rear ones and they go up and down but for some reason I cannot switch to the front ones to adjust them. Please help thanks

DS-90X starting question

My sons ride has began to not start when using the starter. It just cranks over. When I use the kick starter it fires up. I tried jumping the battery to see if it was low but that makes no difference. I was thinking it might be a weak coil and not getting enough when the starter is running but I am not sure. The bike runs great after it starts and after running for a while it seems to start with the starter but if he misses the magic starting point it will not start without the kick starter.

Just looking for some other ideas.