Hey guys just curious to see if anyone has good or bad experiences with different kinds of seats. I’m looking for one with storage and the arm rests. I have a 2019 sportsman 850. I can’t seem to find any that say they fit exactly to my wheeler. Any suggestions??
Passenger seat
Hey guys just curious to see if anyone has good or bad experiences with different kinds of seats. I’m looking for one with storage and the arm rests. I have a 2019 sportsman 850. I can’t seem to find any that say they fit exactly to my wheeler. Any suggestions??
2000 500. Shifter
Good day. I'm new so appoligise if redundant. Did a quick search and didn't figure it out.
Was hard to get into reverse. Now won't. Tried to manually tap the "linkage tab" in rear, no joy. The shifter handle is very loose. I need to replace the rubber boot on shifter and clean and replace oil, but want to verify something first. When you remove 4 top screws on shifter boot, should the whole shifter just come out? Nothing holding in place?
Thanks
Was hard to get into reverse. Now won't. Tried to manually tap the "linkage tab" in rear, no joy. The shifter handle is very loose. I need to replace the rubber boot on shifter and clean and replace oil, but want to verify something first. When you remove 4 top screws on shifter boot, should the whole shifter just come out? Nothing holding in place?
Thanks
Hi from Iceland
Just saying hi. New to atv world but have been riding motorcycles for many years. Just bought an Sportsman x2 800 2007. Looking forward participating in this forum
High Gear Grind – 04 Sportsman 600
My new to me 04 Sportsman 600 has the dreaded high gear grind. It won't even go in for me. When I try to slide it into high at a complete stop it just grinds until I put it back in low etc. I've tried being patient and finesse it etc, but no Bueno. I'll pull off the outer cover and check it out first, but it just seems more like it'll be the gear.
I watched a youtube vid that showed a guy swapping out the high gear which is I'm sure what I'll have to do. The problem is that he doesn't know the part number. I have the service manual, but the trans exploded view is terrible.
Can someone tell me what the part number is for the high gear and how many teeth it has? Not that it should matter, but it's an early 2004 machine. The only difference in the tranny is where the fill and drain plugs are located.
Thanks.
I watched a youtube vid that showed a guy swapping out the high gear which is I'm sure what I'll have to do. The problem is that he doesn't know the part number. I have the service manual, but the trans exploded view is terrible.
Can someone tell me what the part number is for the high gear and how many teeth it has? Not that it should matter, but it's an early 2004 machine. The only difference in the tranny is where the fill and drain plugs are located.
Thanks.
bogging
when i first take off my magnum bogs a little till i get going but then it seems to clear up, i loosened the drain plug on the carb and drained the gas out of it but that didnt cure the problem, its just at slow speeds when it bogs....any ideas???
front diff oil fill plug mod
my new 2019 sportsman 570 SP , 2 weeks old is due for first fluids change. the front diff fill plug
needed a little modifying IMHO. i cut a little slice of the bottom plastic with a zip cut and this pic tells the rest of the story.
needed a little modifying IMHO. i cut a little slice of the bottom plastic with a zip cut and this pic tells the rest of the story.
2011 Sportsman 500 HO Replacement Seat Cover
Just curious what seat covers you guys would recommend or to avoid? What years will all fit the 2011 500 HO?
Was also curious if there is a gripper seat cover available, one that is not as smooth as the stock cover and slick?
Thanks
:beerchug:
Was also curious if there is a gripper seat cover available, one that is not as smooth as the stock cover and slick?
Thanks
:beerchug:
Remanufactured Engines and Transmissions!!
Below is a picture of a recently remanufactured Polaris 1000 transmission here at nFLOW. Please keep us in mind for all of your engine, transmission and turbocharger reman needs. You can reach us at 812-402-8282, ask for Corey. www.nflowmotorsports.com
Cam bearing 800 Polaris
Can you redo the cam bearings on the housing itself or how does that work