News

Still having clutch issues. I have a 2000 Polaris sportsman 500. I could pick up primary and secondary clutches from a 2004 sportsman 400. Will they work without switching springs and weights?

Sent from my SM-J327V using Tapatalk

Put these new rear tires on a couple weeks back and haven't ridden a lot, but what I have I love them with the exception of how well they clean. My only comparison is the original Carlisle which seamed to clean themselves very well, the new Bear Claws throw mud every where yet when I put it in the barn there is still a ton of mud in the lugs. I'm running 18 psi due to the beads not wanting to seat when first installed, they suggest running 7-10 psi yet I think the lower psi would only make the situation worse. Please help, 2002, 500 HO Scrambler 4x4, 22x12-10 tire size.

Attached Thumbnails

     

Hey all I posted awhile ago about coolant in my oil on a 2003 700 sportsman. Think I found the issue, I had put a water pump rebuild kit in it and installed that washer deal behind the impeller wrong. I had put the rubber side in and its supposed to be facing the impeller correct? When i took it apart the rubber piece was stuck to the spring thing. Now can I just replace the washer thing or do I need to replace the seals to. Ordered a machined aluminum impeller because the plastic one is chewed up from the washer being put in incorrectly. Thanks for any and all help. Bob

Stumbled across this and thought I would share it. For those few here who insist I'm biased when I make the recommendation to try the HTR, well, read it and weep. :grin

https://www.chapmoto.com/blog/2018/0...nded-for-2018/

Hey Gang,
We are in the last few days of our VIPER MAX winch sale.....15% off any of our VIPER MAX winches -- all the way up to 6000lbs. The sale has been a solid hit with several thousand dollars sold.

VIPER MAX is now IP67 rated with an official automotive waterproof rating on all winches 3500lbs and higher.

Give us a shout if you want to get one before the sale ends. See video below for more details on the winches. Thanks!

https://www.dropbox.com/home/MOTO%20...r+MAx+1080.mp4

Hey Gang,
We are in the last few days of our VIPER MAX winch sale.....15% off any of our VIPER MAX winches -- all the way up to 6000lbs. The sale has been a solid hit with several thousand dollars sold.

VIPER MAX is now IP67 rated with an official automotive waterproof rating on all winches 3500lbs and higher.

Give us a shout if you want to get one before the sale ends. See video below for more details on the winches. Thanks!

https://www.dropbox.com/home/MOTO%20...r+MAx+1080.mp4

I just got my top end put back together and it wouldn’t start and every now and then it would back fire like a shotgun, so I figure the timing is off and it’s loading up. So I ordered a fly wheel puller and pull it to check the keyway and key, both were in working condition, I grabbed the pulse generator and I could move the plate that the pulse generator and the stator is mounted to and it was very loose, actually looks like it was bouncing around for a little bit, so I need help determining the setting for the plate so the timing is on. I found a timing mark on the case but I am guessing where the other mark was got worn off by the plate bouncing around on the screws. Any help would be appreciated thanks.





Sent from my iPhone using Tapatalk

I have a 01 expedition,the AWD is not working!I checked the wires for juice and the ground wire is also hot!could the magnetic coil be bad? thanks for the help,Ben

Anyone has ever tried an expandable snow plow on a UTV? What do you think about it? Are you satisfied? What are pros and cons?
Looking to buy one but I'm not sure if it's worth it!

Thanks!!