News

hey guys im about to buy 2 ATV next week one for me and one for my wife, 850 xt & 1000r xt-p one thing id like to clarify with owner of 2018 models . is the rear diff noise prob still here ? found alots ppl talking bout this stuff and it scare me, so please can someone tell me about it ?

My fiance decided to take the Maverick out at 1:00 in the morning and got it stuck in the pond. He is not sure where exactly the water was up to but the airbox on the driver side and muffler were not in the water. He shut it off as soon as it happened and drained all the oil (it looked like chocolate milk) and after he did that when he started it, it started to knock, loudly. What is everyone's tips on what should be done before taking it to the dealer? It is still under warranty and hasn't even had it's second service yet but I know the warranty will not cover it if it's the drivers' fault.

my fiance decided to take the Maverick out at 1:00 in the morning and got it stuck in the pond. He is not sure where exactly the water was up to but the airbox on the driver side and muffler were not in the water. He shut it off as soon as it happened and drained all the oil (it looked like chocolate milk) and after he did that when he started it, it started to knock, loudly. What is everyone's tips on what should be done before taking it to the dealer? It is still under warranty and hasn't even had it's second service yet but I know the warranty will not cover it if it's the drivers' fault.

Was riding Friday Night with High Beams on, then turn off the engine for a while. Then when I turn the engine back on, the Low Beams were the only lights that would work. No High Beams....Would that be high low beam switch or fuse/relay or something else?

Hello! My wife and I just purchased our first CAN-AM Outlander. We went with the Max XT 850 and couldn't be happier. Just waiting for the trails to dry and open up in the next week or so. We are from northern Maine close to the border of Canada. Looking forward to being part of the CAN-AM community. We have a good group of men/women/families that like to go out and ride on weekends/after work on weekdays. Most of us in our group have SxS but several now have ATV's. Our group consists of all makes and models not just CAN-AM and are family friendly. We typically ride the more aggressive trails around here with good elevation changes and mud as opposed to the railroad bed trails. We usually plan our trip around the experience level of the people riding with us. If anyone is ever in northern Maine and looking for people to ride with let me know!

I know this topic has been beaten to death. Ive tried everything to get this thing to shift smoothly. Everything on this machine is basically brand new looking. Pulled clutches and cleaned them. Pulled gear box and greased it. One way bearing feels perfect to me. Washers are mint. The one thing i cant seem to figure out is how to get the sheeves to slightly open on the secondary? The belt is to tight. Its riding to high on the driven clutch. My bolt holding driven clutch in is not the one that takes shims. There are 2 washers on the back side. Would pulling 1 off make the driven clutch open a little bit or is that for just alignment? Also motor mounts look great with no wear and can not budge the motor. Any help would be appreciated

Sent from my SM-G950U using Tapatalk

As far as I can tell it seems to do nothing. When I went to replace my original battery it was still very dirty/muddy on top of the battery and around the terminals. I'm debating just replacing the strap to hold the battery down and leaving that cover off.

Any thoughts?