sand tires for rene 1000

looking at some 26"x12.5"x12" 12 paddle hauler extremes. i have a 2015 rene 1000xxc, full muzzy, programmer, is anyone with a similar setup running 12 paddles or is it too many.
what width of rim and offset do you run with this size tire?
any info will help thanks

Upgrading to the 1000

Sold my 650 last fall and going to pull the trigger on the 1000 6x6 this weekend. Wanted to get inputs on some of your upgrades that people have done to their machines; ones that you were happy with and others that were a total bust and would not do them again. For me I will say buying that utility box that slides under the tilt bed was the worst 425.00 dollars I ever spent, will make my own this time around. I liked the HDPE 1-pc skid that I installed on my 650 and will go with that again unless there is something else better. Some items I am thinking about:
- Fuel controller, (on the 650 I liked it, not sure if the 1000 needs one...thoughts?)
- Will do the rad relocate, probably the best mod I did to my 650, love having the radiator out of the mud. However I sacrificed my front rack...
- What about shocks? The fronts are really soft on this machine
- Anything else you want to share will be appreciated
Thanks

2016 Sportsman 570 starting issue

A few weeks back I was riding my atv in the snow when it suddenly got sluggish and started backfiring. Limped it back to the trailer and had to winch it on.
Took it to the dealer and they diagnosed it as a fuel pump and throttle position sensor. Now I'm going to attempt to fix it myself.
What's a good after market fuel pump or should I stick with oem?
Also, are the clips Amazon sells the proper ones for the panels?

Push-type Fastener Retainer Clips - 35PCS 8 mm Black Nylon Push Pin Splash Guard Body Panel Fit For Honda, Kawasaki, Polaris and Suzuki https://www.amazon.com/dp/B076HD2VQ3..._oxQVAbG6R6S4B

2009 sportsman issues

I have a 2009 Polaris Sportsman 500 HO starter solenoid clicks and won't start starter has been tested and starter is good and a solenoid is brand-new as well

Terrifying video shows cyclist’s view of head-on collision

Filed under: ,,,,,

We've all seen examples of drivers who don't square their turns, instead making left turns that are too tight and cut well into the oncoming driving lanes, making you glad there's nobody approaching to make their own left turns.

Continue reading Terrifying video shows cyclist’s view of head-on collision

Terrifying video shows cyclist’s view of head-on collision originally appeared on Autoblog on Fri, 30 Mar 2018 16:35:00 EDT. Please see our terms for use of feeds.

Permalink |  Email this |  Comments

Secondary buttons & helix

Installing a QSC clutch kit I bought from member Double_J (excellent seller by the way). My question is about the buttons in the secondary, are they bad enough to need replacing or do they have some life left? Included a picture of the helix too.

Attached Thumbnails
Click image for larger version

Name:	IMG_0366 (Edited).JPG
Views:	N/A
Size:	4.77 MB
ID:	104617   Click image for larger version

Name:	IMG_0367 (Edited).JPG
Views:	N/A
Size:	3.69 MB
ID:	104625  

AWD won’t engage.. HUB problem?

Hi, So I have a 1999 Sportsman 500 that the original owner said the AWD did not work. I checked all the wiring and have the 23 ohms to both coils, I have 13.5+ volts with it running going to both coils. I have taken them apart to verify parts. All the parts look correct, the armature plates looked a little worn so I replaced them. The cam/rollers/spring all look in very good condition and are smooth. When I test it with the awd on, the armature plates magnetism is working and they hold very well. I put the cam on without the hub and turned the wheels slowly in awe and the rollers do move outwards.When I put it all together it seems like the rollers/cam isn't grabbing the hub at all. I can't figure out why the front awd will not work. All the parts seem to be working correctly.

I am wondering, is it possible that the inside of the hub is too worn or too large that the rollers aren't grabbing? I wondered if possibly someone switched the hubs at some point, but I checked all models between 1995 and 2004 on the parts diagram and they all use the same hub so I have eliminated this.

Any help would be greatly appreciated.

AWD won’t engage.. HUB problem?

Hi, So I have a 1999 Sportsman 500 that the original owner said the AWD did not work. I checked all the wiring and have the 23 ohms to both coils, I have 13.5+ volts with it running going to both coils. I have taken them apart to verify parts. All the parts look correct, the armature plates looked a little worn so I replaced them. The cam/rollers/spring all look in very good condition and are smooth. When I test it with the awd on, the armature plates magnetism is working and they hold very well. I put the cam on without the hub and turned the wheels slowly in awe and the rollers do move outwards.When I put it all together it seems like the rollers/cam isn't grabbing the hub at all. I can't figure out why the front awd will not work. All the parts seem to be working correctly.

I am wondering, is it possible that the inside of the hub is too worn or too large that the rollers aren't grabbing? I wondered if possibly someone switched the hubs at some point, but I checked all models between 1995 and 2004 on the parts diagram and they all use the same hub so I have eliminated this.

Any help would be greatly appreciated.

Hilliard Clutch Front hub problem, please help

Hi, So I have a 1999 Sportsman 500 that the original owner said the AWD did not work. I checked all the wiring and have the 23 ohms to both coils, I have 13.5+ volts with it running going to both coils. I have taken them apart to verify parts. All the parts look correct, the armature plates looked a little worn so I replaced them. The cam/rollers/spring all look in very good condition and are smooth. When I test it with the awd on, the armature plates magnetism is working and they hold very well. I put the cam on without the hub and turned the wheels slowly in awe and the rollers do move outwards.When I put it all together it seems like the rollers/cam isn't grabbing the hub at all. I can't figure out why the front awd will not work. All the parts seem to be working correctly.

I am wondering, is it possible that the inside of the hub is too worn or too large that the rollers aren't grabbing? I wondered if possibly someone switched the hubs at some point, but I checked all models between 1995 and 2004 on the parts diagram and they all use the same hub so I have eliminated this.

Any help would be greatly appreciated.