News

New to the forum and trying to lean on yall’s experience for the following:

Is this the right programmer I need to buy to get the Outty 2013 800 to not run lean anymore (this is my firts EFI machine)? Yes/No or recommendations? What else will I need? I just read here about this making the engine not run lean anymore and cooler. I am trying to get rid of the heat.

https://www.2wheel.com/big-gun-tfi-p...yABEgKhcfD_BwE

Second question:
Will a 2” Highlifter bracket lift wear out my OEM axles? The machine is used for trails ride. Just trying to get more ground clearance.

I’m sure this is not the first time these questions get asked. Just point me in the right direction since I read a few threads but I cannot get what I am looking for. Thanks in advance.

Can someone point me in the right direction for some suspension help? Not sure what to do.
Thanks everyone.

Hi, so i bought a used 06 foreman 800, seemed ok when i bought it, i noticed a difference when i engaged the 4x4 when i was riding around. Well now that there is snow i noticed that i don't have much torque coming from the front wheel in forward and reverse with awd engaged. Back wheels spin a whole lot and the front wheels don't want to dig me out at all as if they are not engaging. Sooo I read the forums and decided to tear the front diff apart, thinking it could be the cage or the armature plate.
When I pulled it apart the cage was fine, the rollers seem a little worn but nothing to crazy, the plate seemed a little worn so i replaced it just in case. put it back together and still nothing. tested voltage and was getting 12 volts to the diff. I don't know what else to do next. could it be the rollers? its just not grabbing on to the axles... Any help is appreciated.

2000 expedition- In the service manual it says the hubs take 5oz of fluid, but in the install directions it says after you drain the hubs turn the drain plug to 4 or 8 oclock direction and fill until it seeps out? i did that in 1 wheel and calculated how much oil it took and then the other wheel i put the 5oz as it says. Well the hub i did with the 4 oclock directions didnt get nearly as much oil as the 5 oz so which way is correct?

Anyone in for a ride on Sunday Dec 17 in Monroe? Forecast saying Sunny and 42. I need to take mine for a test ride since rebuilding my damage from the direct encounter with the tree damage!

Hey guys, I was hoping I could get some help. I bought my daughter a 2008 sportman 90 for Christmas: I want to add an led light bar to it but I’m not sure how much power this little 90 can handle, can someone tell me how many watts of bar it can handle?


Second, the hand brake on the right side (not sure if that is front or back brakes) but it doesn’t have any real stopping power. Which set of wheels does the right brake control and is there any easy way to adjust them (I’m not much of a mechanic)


Thanks guys

Tim in sacramento

Ready to close the deal. Was either this or Kawi Mule PRO FXT EPS as I really like the six seats but not the width, height and issues we have with UTVs greater than 1k pounds here in Ny.

Anyone know who makes A Arm guards for this thing?
Apparently they are different than 2017 so I’ve been batting zero.

Same with skid plates.

Working with John at ATV-G on the bumpers.
Polaris look good but don’t appear to protect low in the front.

Looking forward to learning a lot from you all.

Hi folks. Im new to this forum. I was looking for a recommendation for a roof and windshield for 2017 Defender. I was in shock when I saw the prices for the average roof. Come on! $400-$500? Isn't it just a molded piece of plastic and some clamps? A darn winch is cheaper than that. Also looking for a reasonably priced windshield. Im not sure if I would want glass or plastic. Im not looking to buy cheap junk but I suspect that someone out there must have some better prices than Ive seen so far. Any advice appreciated. Thank you

i have a 2000 expedition. 4WD is not working. Ifound the 2 wires that go to each hub and i am not getting 12v at the connectors by the steering compartment. Is there a fuse? Is the AWD switch just a 12v switch maybe i can jump the wires out and get 12v to the connectors?

Hey guys, I recently picked up a 2003 sportsman pretty cheap;however, it has no spark. I believe it is the cdi, but I want to make sure. It is the ducati one, and I read that's not great. About a week ago, I found a post somewhere that had the resistances to test the cdi, but no matter what I try I cant find it now. Does somebody has the method of testing the cdi?

Also, I am not 100 percent sure what engine this has, the seller told me it was a 700, but he also said it was a 2006 and it is a 2003 so I want to double check.

Thanks in advance! Ryan