News

Does anyone have experience with air filter k/n
Is filter really better?

OK I'll be getting a new battery but would like to no why?
I had a dead battery(slow crank,wouldent start) reading @11.??volts on multi meter.I have a anti gravity jumper and it starts right up with that.
So I put it on the battery tender and its full at 12.50 v(or 12.65 .I forget)but still has the slow crank after cranking it will read @12.50.
why with 12.50 would it still need a jump?bad cell?
Yes battery is old ,probably 7years

2008 Sportsman EFI HO

So I realized my master cylinder is leaking/allowing air in. Noticed cracks and bubbles etc.

Does anybody know where to get just the seal? All I’ve found was the cap and seal combo for anywhere from 65-80. My cap is good and I see no point in spending that.

Or maybe a good aftermarket assembly?

Thank you!


Sent from my iPhone using Tapatalk

Brand new to an online form, first one ever registered to. Live in Wisconsin, have a few BRP products. My favorite of which is my 2013 Outlander 650 DPS. Only a few mods, most of which are Can-Am. Up graded heated hand grips. Snorkel kit and high mount rad kit installed. Black widow rear storage and cushy seat installed. Sitting tall on 30 x 9 Gorilla Silver Back tires. 14" ITP SS wheels.

Attached Images

File Type: jpg	20171113_175320_1511608190337.jpg (2.58 MB)
File Type: jpg	20171114_085056_HDR~2_1511608206736.jpg (1.10 MB)

I have a 16 570 sportsman touring sp. Problem I keep having is chipmunks and or mice keep putting acorns in my air box and clutch housing. Not a fan of acorn butter, so does anyone make screen caps for the clutch housing/air intake ports? Thanks in advance. I guess I could zip tie screen material, but hoping for a part...

So today while out riding with a friend his rear intermediate shaft came out and caused the rear output shaft to bend. Has anyone ever seen this happen and possibly know what would cause it. It’s a 2013 outlander 800 xtp


Sent from my iPhone using Tapatalk

It's been quite a while since I had an atv... 2001 when I sold it. I'm a fan of BRP and currently have four of their sleds. I'm convinced that the Outlander is my next purchase (two actually, the wife needs a ride also). I wanted to become a member now so I can spend a little time with ya'll and see what's going on in the Can Am world. Happy to be aboard!

I took the atv for a ride today (5-6 minutes) and when I parked it the atv wouldn't start back up.. it makes a clicking noise instead of cranking and the atv is giving off 2 codes: 520230 31, and 520193 7

Any help will be appreciated

I took the atv for a ride today (5-6 minutes) and when I parked it the atv wouldn't start back up.. it makes a clicking noise instead of cranking and the atv is giving off 2 codes: 520230 31, and 520193 7

Any help will be appreciated

HI any one having trouble with 2016 450l outlander starter drive not working when cold only 450 miles dealer put new drive on same thing