Tire pressure and pump

Hola amigos:
Leland here. I am very new to ATVs. As a matter of fact we just bought a new Outlander for mexico to use as a street ride. I have been reading in the manual about tire pressure. It says 7psi from and back. What king of air pump do you guys recommend for inflating the tires? It may sound like a dumb question but when in doubt, ask.
Thanks
Leland:th_smiliecoffee:

2004 trailblazer 250 starter solenoid

new one does not match up exactly. The big wires match up.
There is only 1 small wire coming off of new solenoid. There were 2 small wires coming off old one.
I was told to ground the second wire.
starter turns over but wont fire up. I checked there is spark.
I removed solenoid and it will fire when i pull start it.
Put it back on and it turns over but wont fire.
something is not correct.....

Cooling system

I kind of fumbled up while I was doing some work on my XMR. I had the rear of my bike jacked up to install the trailing arm. I took a break and popped the plastic off the front mounted radiator. I saw the radiator cap and got the bright idea to check the fluid. Well, I opened the cap and saw air get sucked down into the line. Now I'm worried this is going to cause an issue with overheating. I don't know the cooling system well on these. Should I burp the system or am I fine?

New member

Hello everyone. Just bought first ATV ever. 2017 Sportsman X2. Road it about 3 hours in the first week, now it sits in the garage. No place in Chicago area to go.
Have to wait for by ting weekends in the U.P. or in Kentucky.
Questions already:
What gun rack grippy things should I buy for holding 1 or 2 rifles across the front rack ?
Which battery tender is good to purchase?
Should I buy a spare tire, or a tire repair kit with mini compressor ? Is there an inner tube in these tires?

Planning to ride mid September at LBL Turkey Bay park for several days
..

Frank.

2005 Sportman 800

My hunting partner has an older 800 with factory tires on it. It was basically never driven when he bought it.

He blew a back tire last week. Went into our storage box @ camp and put my 2012 Sportsman 500 489 Carlisle take offs , which are too small but mount up so he could get it back to camp.

Im ofcourse against him using my take offs needless to say.

My question is, he can't buy a matching tire, they're not made anymore. They are labeled Polaris tires made by Carlisle. It's a discontinued tread. But could he buy 1 new , unmatched tread , run it, without screwing up the rear end, tranny or the 4x4 / AWD ?

Any help would be much appreciated.

Thanks

Mike


Sent from my iPhone using Tapatalk

Abnormal Belt wear and clutch corrosion

I have a 2015 Outlander 1000 XT-p with ~500 miles and 75hours.
I was racing a Maverick, and holding the brake with the clutch engaged to get a hole shot. I only did this once, and I really don't drive super aggressive and most of the trails I ride are rough and there are lots of hill climbs.I noticed that the belt has some abnormal wear and the primary clutch has a bit of rust on the inside sheave.
I pulled the cover to inspect after the ride and noticed some abnormal wear on the belt and the inside sheave of the primary has some surface rust (See pictures)

I am ordering a new belt for sure but I am debating whether or not to pull the clutch and service it. I am asking about it because I am wondering if this is an alignment issue or something more major.

Attached Images
File Type: jpg 20170804_143238.jpg (1.27 MB)
File Type: jpg 20170804_143144.jpg (1.60 MB)

Polaris Industries Just Hit a New Milestone, And It’s Not a Good One

NOT GOOD!
Polaris Industries Just Hit a New Milestone, And It's Not a Good One

The powersports vehicle maker has dodged a hit to its reputation so far, but it's only a matter of time before its past catches up with it.


Warren Buffett famously said, "It takes 20 years to build a reputation and five minutes to ruin it. If you think about that, you'll do things differently."
It might not be in a matter of minutes that the reputation of Polaris Industries (NYSE:PII) is coming undone, but its repeated product recalls is surely undermining whatever shred of credibility it had in building quality vehicles. The question for investors is whether the company will do things differently to prevent further erosion. By the looks of it, one could be forgiven for thinking no.

Typically companies celebrate achieving certain milestones. Polaris would instead like you to forget the one it just hit. In the past two and a half years, the Powersports vehicle manufacturer has been forced to recall over 400,000 vehicles for manufacturing defects, and all the good work Polaris has put into building trailblazing, award-winning vehicles is at risk of being damaged because it can't find the right fix for its manufacturing problems.
Several weeks ago Polaris issued two additional recalls: one for 25,600 Sportsman 570 all-terrain vehicles for fuel leaking into the headlights, and one for 1,160 of its off-road RZR 570 models where the front brakes could detach. The combination brought Polaris to its dubious watershed moment.
Unfortunately, it ended the month of July issuing yet another recall, this time for its youth RZR 170 models due to cracked fuel tank necks along with reports of burning, smoking, melted, and shorted wires. Each sets of recalls was accompanied by a small number of actual fires.

There is obviously a price tag associated with these recurring manufacturing problems. Last year Polaris reported an increase of approximately $31 million in its cost of sales due to higher warranty costs associated with the recalls while having to add $62.8 million to its warranty reserves. It ultimately paid out more than $132.3 million in warranty claims in 2016, almost 90% more than the year before.
So far this year, Polaris has paid out $72.7 million in warranty claims and boosted its reserves by over 40% from the same time last year.

This is the tangible impact of Polaris failing to get a grip on its manufacturing issues. Although the company reportedly initiated a top-to-bottom review of its processes and appointed specific people to oversee the effort -- it was the review that led the Powersports vehicle maker to recall the RZR 570s -- the subsequent recall of the RZR 170s, which includes the model years from 2015 to 2017, shows there's still a breakdown along the way.

The internal review process should allow Polaris to end up producing a better, safer product in the future, and the toll taken on sales probably still has as much to do with the overall industry slowdown as it does with the manufacturing problems. Investors are also still giving Polaris a pass, as its stock is up 10% in 2017 (and only down around 5% over the last 12 months). But at some point the vehicle manufacturer is going to burn its reputation -- if not beyond repair, then enough to damage its ability to recover when the industry itself makes a U-turn.
Manufacturing problems are not always fatal, even a string of them. Boeing (NYSE:BA) infamously had significant and serious issues with its 787 Dreamliner aircraft that resulted in numerous delayed deliveries and canceled orders, but it was able to get back on track and score more orders at this year's Paris air show with the 787 than its rival Airbus could with its competing A380.
So Polaris Industries still has an opportunity to correct this deep problem, and it's planning for 2018 to be better than this year. But it's also thought it had these issues licked before.
Unfortunately, more recalls are likely in Polaris Industries' future, and if they're issued at the same level the most recent ones were, the Powersports vehicle maker should surpass the next ignominious milestone of half a million vehicles recalled.

Polaris Industries Just Hit a New Milestone, And It’s Not a Good One

NOT GOOD!
Polaris Industries Just Hit a New Milestone, And It's Not a Good One

The powersports vehicle maker has dodged a hit to its reputation so far, but it's only a matter of time before its past catches up with it.


Warren Buffett famously said, "It takes 20 years to build a reputation and five minutes to ruin it. If you think about that, you'll do things differently."
It might not be in a matter of minutes that the reputation of Polaris Industries (NYSE:PII) is coming undone, but its repeated product recalls is surely undermining whatever shred of credibility it had in building quality vehicles. The question for investors is whether the company will do things differently to prevent further erosion. By the looks of it, one could be forgiven for thinking no.

Typically companies celebrate achieving certain milestones. Polaris would instead like you to forget the one it just hit. In the past two and a half years, the Powersports vehicle manufacturer has been forced to recall over 400,000 vehicles for manufacturing defects, and all the good work Polaris has put into building trailblazing, award-winning vehicles is at risk of being damaged because it can't find the right fix for its manufacturing problems.
Several weeks ago Polaris issued two additional recalls: one for 25,600 Sportsman 570 all-terrain vehicles for fuel leaking into the headlights, and one for 1,160 of its off-road RZR 570 models where the front brakes could detach. The combination brought Polaris to its dubious watershed moment.
Unfortunately, it ended the month of July issuing yet another recall, this time for its youth RZR 170 models due to cracked fuel tank necks along with reports of burning, smoking, melted, and shorted wires. Each sets of recalls was accompanied by a small number of actual fires.

There is obviously a price tag associated with these recurring manufacturing problems. Last year Polaris reported an increase of approximately $31 million in its cost of sales due to higher warranty costs associated with the recalls while having to add $62.8 million to its warranty reserves. It ultimately paid out more than $132.3 million in warranty claims in 2016, almost 90% more than the year before.
So far this year, Polaris has paid out $72.7 million in warranty claims and boosted its reserves by over 40% from the same time last year.

This is the tangible impact of Polaris failing to get a grip on its manufacturing issues. Although the company reportedly initiated a top-to-bottom review of its processes and appointed specific people to oversee the effort -- it was the review that led the Powersports vehicle maker to recall the RZR 570s -- the subsequent recall of the RZR 170s, which includes the model years from 2015 to 2017, shows there's still a breakdown along the way.

The internal review process should allow Polaris to end up producing a better, safer product in the future, and the toll taken on sales probably still has as much to do with the overall industry slowdown as it does with the manufacturing problems. Investors are also still giving Polaris a pass, as its stock is up 10% in 2017 (and only down around 5% over the last 12 months). But at some point the vehicle manufacturer is going to burn its reputation -- if not beyond repair, then enough to damage its ability to recover when the industry itself makes a U-turn.
Manufacturing problems are not always fatal, even a string of them. Boeing (NYSE:BA) infamously had significant and serious issues with its 787 Dreamliner aircraft that resulted in numerous delayed deliveries and canceled orders, but it was able to get back on track and score more orders at this year's Paris air show with the 787 than its rival Airbus could with its competing A380.
So Polaris Industries still has an opportunity to correct this deep problem, and it's planning for 2018 to be better than this year. But it's also thought it had these issues licked before.
Unfortunately, more recalls are likely in Polaris Industries' future, and if they're issued at the same level the most recent ones were, the Powersports vehicle maker should surpass the next ignominious milestone of half a million vehicles recalled.