Hey everyone, I'm from Winnipeg mb not sure, just picked up a 2012 renegade 1000 xxc whole new machine to me should be a good time! Does anyone have personal experience with the halo rings on these machines? Wondering about some reviews on brands and such!
April 2019 rebates. Any leads?
I know can am is pretty hush hush on rebates until they release them but has anyone heard anything on April's 2019 rebates? I am buying a 1000xt and am debating to buy now or wait til April. Talked to my local dealership and they said wait til April because Polaris announced some aggressive rebates and can am will come hard back. Not sure whether to believe them or not but why would they tell me to not buy one that day. I refuse to buy one without +2 years of warranty and I would hope for at least that and $300 off. I bought my 2013 new in April 2013 and got 2 years warranty plus $500 off.
4 wheel drive
I have a 2009 Sportsman 850 XP EPS.
I wonder if there is a way to over-ride the on demand 4 wheel drive and make the front axle engage when the slide switch is in either of the 4 wheel drive position.
There are situations where I want power on the steering wheels, but do not want to make the rear wheels spin.
I wonder if there is a way to over-ride the on demand 4 wheel drive and make the front axle engage when the slide switch is in either of the 4 wheel drive position.
There are situations where I want power on the steering wheels, but do not want to make the rear wheels spin.
Kind of a new member. Not many posts but I got a new ride!
I recently picked up my new 2019 Sportsman 850 SP Premium. I absolutely LOVE the new paint and fluorescent yellow stripe! I had to swap my tracks from my 2018 850, wire in my front light bar, rear lights, switches, hand/thumb-warmers. But it was ready for our last snow storm. [emoji16]
Here’s a few pictures of the build so far. I ordered a VIP AIR windshield that should be here Wednesday. Should look good, as it’s painted to match the machine. Thanks for looking.
Sent from my iPhone using Tapatalk
Here’s a few pictures of the build so far. I ordered a VIP AIR windshield that should be here Wednesday. Should look good, as it’s painted to match the machine. Thanks for looking.
Sent from my iPhone using Tapatalk
07′ Still getting it done in the SNOW!
This old quad still gets it done better than anything I ride with...:wink
No Mods to speak of....26" BigHorn 2.0 aired down.
No Mods to speak of....26" BigHorn 2.0 aired down.
07′ Still getting it done in the SNOW!
This old quad still gets it done better than anything I ride with...:wink
No Mods to speak of....26" BigHorn 2.0 aired down.
No Mods to speak of....26" BigHorn 2.0 aired down.
New to me bike home
Ended up with a gently used 16 Max 850 XT. Just got her home. Ill unload tomorrow and christen her.
2008 Outlander Max 650XT
What’s up guys, from middle Tennessee and I’ve always love riding atv’s and dirt bikes but It was always cheaper stuff. I broke down 6 months ago and bought a Outlander 650, but in the last 6 months I’ve tamed the beast. So I’m real interested in any of the first couple proformance upgrades, exhausts and clutch... not quite sure what all the efi does, so any advice and informants would be great, Thanks!
2007 Sportsman 800X2 Front Gear Case Parts
got an ADC Unit with the Turf Mode Polaris 1332568
The small roll pins (5 per side) on the ring gear sheared off. And I believe it could use clutch plates. Any one know of aftermarket for either. Polaris and their ridiculous parts practices make you buy full assemblies which total far above the cost of a new diff when these are simple items to replace and cheap.
Also who actually makes these diffs. I recall John Deer maybe crossing over to some Polaris units and priced much better.
Thanks
The small roll pins (5 per side) on the ring gear sheared off. And I believe it could use clutch plates. Any one know of aftermarket for either. Polaris and their ridiculous parts practices make you buy full assemblies which total far above the cost of a new diff when these are simple items to replace and cheap.
Also who actually makes these diffs. I recall John Deer maybe crossing over to some Polaris units and priced much better.
Thanks
Starting/Electrical Problem
Battery shows good on my charging device but when I hit the button it just clicks; I jumped it from the solenoid connection and it started.
I left it idling for a bit and it died after about 5 minutes or more "It did have a "HI BATT" message on the console, had never seen that before, Ive only seen the LO BATT message in the past. Bumped it again and it clicks as before. Jumped again with jumpbox and it Revvs up and down a from 3K-4K Rpm's. So I take the jumpbox off and it dies.
I pulled the plastic off the front and checked all connections and did a little maintenance in there hoping it might clear up a elec bug.
Again I get the same result; Revvs up and down and then dies when I disconnect the jumpbox.
Super Strange because it was idling perfectly normal when I bumped it the first time and left it alone to idle.
Its been awhile since I have had to mess with the quad, its been super solid for many years and I've actually never had to fuss with or replace anything but the Battery since I bought it in 2010 if I recall correct.
I left it idling for a bit and it died after about 5 minutes or more "It did have a "HI BATT" message on the console, had never seen that before, Ive only seen the LO BATT message in the past. Bumped it again and it clicks as before. Jumped again with jumpbox and it Revvs up and down a from 3K-4K Rpm's. So I take the jumpbox off and it dies.
I pulled the plastic off the front and checked all connections and did a little maintenance in there hoping it might clear up a elec bug.
Again I get the same result; Revvs up and down and then dies when I disconnect the jumpbox.
Super Strange because it was idling perfectly normal when I bumped it the first time and left it alone to idle.
Its been awhile since I have had to mess with the quad, its been super solid for many years and I've actually never had to fuss with or replace anything but the Battery since I bought it in 2010 if I recall correct.