News

On my 2014 Sportsman 550 XP the wheel castle nuts and thrust washers are frozen rusty. I ride the beach a lot and well its one spot I cant rinse off.
Steel wheels have the dust cap but on the 14" alloy ones there is no way to pack the hub end with grease and seal it.
Any good ideas ??
Thanks

I never had a problem adding coolant to the radiator after draining it on my other past sportsman's, but for some reason the 570 does not accept any coolant directly into the radiator. Is there another port to use? or does it have to be bottle fed through the overflow tank hose? I'm baffled here.

Owning my Polaris has been nothing but a dream, only nightmare I’m having is with the Front Diff. 2nd diff in a year. Was wondering if I would be able to bolt a 2019 HighLifter 1000 Front Diff onto my 2015 Sportsman 1000xp. Or at this point if anyone knows of an aftermarket company making heavy duty front Diff’s. Any help is apreciated!

Hi has anyone tried to get a new Vin sticker from can am?

Hello!

Bought this beast a few weeks ago with 1800Km. Also got a 54” berco blower (12.5ft long as 1 machine). Amazing first big purchase, I’ve had so much fun and plan on using it to haul firewood this season.

Just reached 2600km and got the fluids for front/rear Dif and oil change.
I changed Front Dif fluid and there were some metal shards and a couple smalllll metal bits.... should I drive like a grandma or will it handle some abuse ?
Drowning in mud isn’t my thing but I definitely like to get dirty!

Running 30 silverbacks now and want to go 32” big horn 2nd genS in the future.
Saving up for a exhaust and good filter (dealer swore by it) and clutch kit to install all at once.
Will the exhaust make the bike run too lean?
Full exhaust vs slip on?

-This is my baby and I plan on keeping it for a while so I am doing a few mods!
My seat melted in a few spots after couple hours playing in the snow so I got some exhaust wrap when I decide to do the exhaust work
I cut a small square to allow more air through the rad relocate on the front.
I’ve replaced 2 axles with Rhino axles

ANY other mods to make it more bullet proof?

Attached Images

File Type: jpeg	6DE8D86B-6DCA-4AE7-9B50-245702461171_1552948741719.jpeg (613.8 KB)
File Type: jpeg	C471793B-BF47-4C35-B5B1-0E3AC59291E3_1552948800377.jpeg (861.1 KB)

Hi. Im looking at getting the direction 2 fender flares. Does anyone have pictures of the flares installed on a 2017 or 2018 black xtp max or std?

Thanks

I'm having a hell of a time getting my starter out. The top back bolt is near inaccessible, haven't been able to get it off with many many cuss words thrown at Polaris for even putting the bolt in there like that, truly what the fuck!!!!!!

Looking to add an LED lightbar to my Polaris Sportsman 850. I already have the stock brushguard and want to install a lightbar. However the Polaris bar is $250 and I believe requires a $60 harness. My question is there other set-ups out there that work good? Show pictures and anyone that has the polaris LED bar is it worth the money?

Side Question: is there a LED replacement for our low/high beams? I know I could go with a 5k white hologram.

Hi Guys and Gals

2018 570 base. I set the clock and it works fine until I turn key to off position. With the key off it stops keeping time and picks up when key turned on again. If I set the clock at 2:00 and ride until 4:00 turn the machine off for a 15 minute brake when I turn it back on the clock says 4:01. Any ideas out there?

Looking to see if anybody has knowledge of extended rear racks for my 03 sportsman 400. Looking to be able to haul my ice shanty on the back of my atv. I’ve found one from Johnson cargo systems but they seem to always be out of stock. Not sure if the company is even in business anymore. Thanks!