News

Does anyone have any more information about installing the passenger heated grips on the Outlander Max? I am installing a set for my brother in law. It is a 2018 Outlander Max 1000 XT-P. The instructions are not very clear as to where the harness plugs in up front. I found a connector that is dead ended into a white plug. I plugged the harness into the connector and the other plug into the white dead ended connector. Is this correct or does that have to go into another spot? The left side is getting warm but the right side is not. The wire harness that BRP provides for under the seat doesn't seem very well built. The wires are very lose in the connectors. I tried pushing in on these but still the right side is not getting any heat. I am going to have another look at it tonight and check the wires to see what ones are getting power. If someone can share any input on this or had similar issues it would be a great help. Thanks

Hello,
do you have any idea why oscillation reluctance? I changed the spark plugs and it still has a small oscillation of 1050-1250-1300 rpm / min ... it also has some rhythm rates ....
When cold, the engine reaches 800rpm and stops

HELLO

I am IRINEL from Bucharest, I purchased a Can am Renegade 800 from 2009, Canada.





Thanks a lot: Th_smiliewoo:: Th_smiliewoo:: Th_smiliewoo:: Th_smiliewoo:

Took throttle spacer out of carburetor. Now throttle doesn’t work. Can anyone give me a fix?

Hi guys. Can someone suggest some aftermarket skid plates ?

I need the front A Arms skid plates and the one from the front under the bumper .

XMR1000r 2018

Just got two base 2018 sportsman's 570 back in December. one red one green..

the Red one had a problem with starting low voltage, and a noise in front end when in snow only in AWD. it's a hard sound to explain but only the RED one is doing it.

I took it back to the dealer and they found out that one of the battery cells had no fluid but they said there was no noise that was out of norm.. even tho i told them the Green one did not make this loud noise.


The noise is at its loudest when in snow going up hill,,, when the front tires are pulling the most.. or on flat ground in snow and sharply turning left right.

It's a growling kinda noise, gets louder the more power you give it.

So after talking to corporate I took it to a different dealer. this time the guy drove it in the snow with me there and looked puzzled when he got back. I hear it he said. but had no clue what it was.


so im waiting for a call back..


anyone out there having this problem?

The Green one work great no problems there.

I will keep my build thread here.

Coming from a gen 1 outlander 800


21458025_10154777478222793_1273193746439543789_o_1 0154777478222793 by James Pate, on Flickr

To my new to me 2014 outlander 1000 xmr

2019-02-17_11-14-38 by James Pate, on Flickr

Future plans are
-Change all the lighting to led whether it is just changing the bulbs or adding/retrofitting led pods in
-Lift rims tires
-Snorkel
-Audio
-Some type of back seat/rest
-Exhaust

I will keep my build thread here.

Coming from a gen 1 outlander 800


21458025_10154777478222793_1273193746439543789_o_1 0154777478222793 by James Pate, on Flickr

To my new to me 2014 outlander 1000 xmr

2019-02-17_11-14-38 by James Pate, on Flickr

Future plans are
-Change all the lighting to led whether it is just changing the bulbs or adding/retrofitting led pods in
-Lift rims tires
-Snorkel
-Audio
-Some type of back seat/rest
-Exhaust

I will keep my build thread here.

Coming from a gen 1 outlander 800


21458025_10154777478222793_1273193746439543789_o_1 0154777478222793 by James Pate, on Flickr

To my new to me 2014 outlander 1000 xmr

2019-02-17_11-14-38 by James Pate, on Flickr

Future plans are
-Change all the lighting to led whether it is just changing the bulbs or adding/retrofitting led pods in
-Lift rims tires
-Snorkel
-Audio
-Some type of back seat/rest
-Exhaust

Hey all, I think we're almost at our whits end with our machine lol! Just seems to be one thing after another but figured I would post here about our current problem.

Recently the Speedo atopped working. It lights up, displays the odometer, fuel but the needle doesn't move. After noticing that, we noticed that the AWD didn't work. Reading up on this determined that they were related.

So we tried the bypass, and the front tires DID start moving, intermittently but we could stop them by hand...

What are we dealing with and where should we start?