News

I have a 2012 500 with stock rims an tires an was looking to go with 26” itp mayhems with new rims. Want to go with 26-11-12 in front and back to match. Are 11 to big for front or should I stay with 9’s in the front.

Hey guys I now produce and sell snorkel risers for the sportsmam highlifter series. It was slow starting but here we are. Have them in any of the highlifter colors. Powder coated 3" aluminum all tig welded risers. Also do customs colors and custom heights or specs upon request. Comes with the couplers and necessary hardware for install. 150$ free shipping for your standard matte black package! Pm for details! Thanks! Follow or add on instagram or facebook. @babbfab @babbfab @babbfab

Attached Thumbnails

         

I picked up a 2014 400HO recently. Basically new with only 26 miles on it. After searching and posting on here I decided to change all the fluids as it is 4 years old. Decided to try and grease it too while I was at it. Front A-arms needed about 10 pumps each along with the rear lowers. Rear uppers only a couple pumps. Now the drive shaft was even worse needing at least 15 pumps before I saw any grease coming out. My question is how, with Polaris quality control could this “new” machine need that much grease? Must have been assembled on a Friday afternoon.

Just purchased my 2nd new atv first was a polaris rzr now a 2019 polaris sportsman 850 sp. So far I am pleased with the 850. I enjoyed the rzr but I really think I like the wheeler better.

This is an odd one, I think. I noticed when sitting in the dark that my display buttons would blink once in a while. After a lot of searching, I found no answers, so here I am. Nothing else blinks, not the display itself, just the buttons below the display in the image attached. They also seem to blink every 50 seconds. Does anybody know of any features of this ATV that would cause it to blink like that? I feel like it drains my battery too. The battery gets weak when sitting a couple weeks. At firts I thought I had a short somewhere causing the blink, but then I measured the interval and it seemed too steady to be a split wire somewhere. Anybody have any ideas? If you need more info, just ask.

Thanks in advance.

Attached Thumbnails

 

Looking at the Polaris 2500 for my 2018 Sportsman 570, any suggestions?
Thanks

Hello,


I recently purchased a used 2016 XMR 650. I came across some numbering/lettering just below the spark plug on both sides of the motor. The bike had around 250 miles on it. Not really trying to decipher what was written, but looking to see as to what this may indicate. I am thinking it was rebuilt but maybe someone knows. Thanks!

Attached Images

File Type: jpg

IMG_20190126_120751[2].jpg (108.6 KB)

Saying hello to anyone. New to my Outlander XMR but not necessarily ATV life. Live in southern part of SC. I cross over and ride in GA and also in central FL.

thought i would dip them before i jumped into powder coating them. i think they turned out pretty dang good!

Attached Images

File Type: jpg

thumbnail_IMG_0523.jpg (26.9 KB)

I bought a 2014 new and it only has around 400 miles on it. Mainly use it for plowing and for deer hunting. Has never really been trail ridden, have had zero issues. Last couple days we have gotten a lot of snow and after about 45 min of plowing the temp light comes on and goes into limp mode? At those times it was hard to tell if fan was running or not. Does the fan quit running if battery gets low? i know when plowing and running the winch the stator doesn't charge very well at low rpm. i limped it into the garage and checked fuses and such and relay for fan. I started it and cooling fan was not running until i reved the engine up, fan would kick on and then kick off at idle? Only thing i can suspect is a low battery (below or at 10 volts)? Advice?