News

Has anyone used Frogz skin on their atv air box ? I'm thinking of putting my cv intake into my air box so i can have the cv exhaust in the stock intake spot. My concern is adding the intake and not being able to flow enough air to both the cv and engine at the same time. Was thinking of adding the Frogz skin onto the top of the air box.

Just curious if anyone has anything good or bad to say about the product.

Looking to see if anyone out there may have a service manual for a 2007 Outlander 650xt they may not need any longer. These machines are vastly different than the Yamaha and Honda that I’m pretty familiar with. Or if anyone may have a suggestion on where to grab one. Thanks.

Hi
I have a 17 -570EPS my problem is I keep losing my power steering with a fault lighting up on my dash,anyone else having this problem.My machine only has 400 miles on it.
Thanks

Morning guys

I’m new to can am and new to the forum. I’ve had plenty of atvs but my recent purchase of a outlander l max 570 has won me over good and proper..
I know nothing about can ams so I’m hoping to do some research on this forum and some advice from you guys...

I’m struggling to find any decent parts here in the uk it’s very limited..
Can any one advise some good web sites please for accessories and mod parts I’d be most grateful for any help..

Thanks guys :wink

Hey Guys

Magnum 425 2x4 Sometimes hard to start. When I used the push button start it makes a clicking sound on the starter solenoid, sometimes no clicking at all. Sometimes it will start no worries. Battery is fully charged. Can be a bit hard to start with pull cord. Any helpful advice is welcome

My 2017 570 hunter edition needs a lift. Does anyone know where and what size to get?

My 2017 570 hunter edition needs a lift. Does anyone know where and what size to get?

I went to put the temp sensor into the bolt hole on the front cylinder and I realized the sensor that came with it is too small. What have you guys that have installed this temp gauge done to remedy this? Is there an adapter of some sort I can buy? Or maybe a new end from koso? Kinda disappointed as I was hoping to get this sensor installed this weekend lol.

Thought it was the trailing arm bushing, but when I took the sway bar nut and lever off the trailing arm moved smoothly with no noise and no play! Has to be something with the sway bar but cannot figure it out?
Please help! :sad

Need some help here.
Have a bad trailing arm squeak. Bad bearing right? Don't think so. I took sway bar nut and lever off and found trailing arm to move smoothly with no play and no squeak! Has to be something with the sway bar. How do these sway bars even work? Do these sway bars actually twist? What is the problem causing the squeak?
Thanks for any help!!

:sad